Contact
closeContact
RMAShippingTests of the products Terms and conditions

Contact us:

alternate_emailsales@cdr.pl

call+48 32 750 5000

mon - fri 9:00 - 17:00

Contact

Log in
closeLog in
Log in

New customer?

Register
Cart
closeCart
Your cart is empty favoriteWishlist
Opton ADSS-XOTKtsdD aerial fiber optic cable 24J 4T6F G.652.D 4 kN G.652.D
Brand: Opton
Product Code: OP-ADSS-XOTKTSDD-24F
Catalog number: 5998
Warranty (months):

Replacement: YOFC ADSS 24J

Archived product
Description
Purchase information

Shipping on a pallet

The cable is originally wound on a roll of 4 km - there is the possibility of rewinding (a smaller section of the cable on another roll), the cost of the rewinding (the drum is included): 25 €


Opton ADSS-XOTKtsdD is a self-supporting, axial fiber optic cable designed for overhead installations. It is equipped with 24 fibers placed in four tubes (6 fibers per tube).  The tubes are twisted around a central reinforcing element - a 1.6 mm diameter FRP rod. The cable is distinguished by a very high pulling force - up to 4000 N. It can be easily hung on spans up to 80 meters. The  used  fibers are G.652.D.

The outer jacket is made of high quality HDPE, its nominal thickness is 1.5 mm. The cable construction is reinforced with aramid fibers, a special locking tape gives protection against moisture. The optical fiber is fully dielectric, in addition there are two ripcords in the cover.

The offered  product is ideal for use in overhead installations, on main routes. The cable is durable and has a long liveliness (it does not lose its operating parameters for a long time).It keeps the  following standards: ITU-T G.652, IEC 60794-1-1, IEC 60794-1-2, IEC 60794-3, IEC 60794-4-20, IEC 60794-4.

The cable has been designed for use in overhead installations, but it can also be successfully used in telecommunication ducts.

The most important features:

  • 24  G.652.D fibers;
  • 5 tubes, (including 1 filler and 4 tubes with fibers);
  • 6 fibers in a tube;
  • ADSS cable type;
  • diameter 9,4 mm;
  • max span: 80 m;
  • pull force: up to 4 kN;
  • Aramid reinforcements

Specification

ADSS-XOTKtsdD 24 fibers
Number of loose tubes 2
Diameter of the tube 2,1 mm
Fillers ammount 1
The amount of fibers in the tube 6
Fiber type G.652.D
Central strengthening element FTP rod
The diameter of the central strengthening element 1,6 mm
Water blocking material Tape
Reinforcement aramid fiber
Outer coating material HDPE
Outer coating color Black
Outer coating thickness about 1,5 mm
Ripcords 2
Cable diameter ~ 9,4 mm (± 5%)
cable weight 62 kg/km (± 5%)
Mechanical and environmental properties
Max span 80 m
Pull force 4 kN
Crush resistance

Short-term: 1000 N /100mm
Long-term: 300N /100mm

Max wind speed 25 m/s
Installation / initial sag 1 ~ 1.5%
Permissible operating temperature From -40 to 70 degrees Celsius
Fiber properties
Kind of fiber G.652.D
Damping

At 1310 nm: ≤ 0.36 dB /km
At 1550 nm: ≤ 0.22 dB /km

Chromatic dispersion

1285 - 1340 nm: ≤ 3,4 ps/(nm*km)

1550 nm: ≤ 18 ps/(nm*km)

1625 nm: ≤ 22 ps/(nm*km)

The zero value of the dispersion 1300 - 1324 nm
Gradient of the zero dispersion ≤ 0,091 ps/(nm*km)
Mode polarization dispersion Single fiber: ≤ 0,15 ps/√km
The limit wavelength ≤ 1260 nm
Fiber diameter 125 ± 1 μm
Coating diameter  (varnish) 245± 7 μm
MFD 

1310 nm: 9.1 ± 0.4 μm

1550 nm: 10.4 ± 0.5 μm