OPTON Z-XOTKtsdDb duct fiber optic cable 144x9/125 12T12F ITU-T G.652.D 2.5kN

OPTON Z-XOTKtsdDb duct fiber optic cable 144x9/125 12T12F ITU-T G.652.D 2.5kN

Brand: Opton

Product Code: OP-Z-XOTKTSDDB-144

Catalog number: 7345

Warranty (months):

Replacement: YOFC Z-XOTKtsdDb 144J

Archived product

Description

Purchase information

The cable is sold on drums with a length of 2 km!

It is possible to rewind the cable (winding a smaller section of the cable on another drum), the cost of rewinding (drum included in the price): 25 €

Shipping on a pallet

Opton Z-XOTKtsd is an optical fiber cable intended for use in teletechnical sewage system. There is a multi-tube construction, it has 144 G.652.D fibers. The fibers are placed in 12 tubes, without any fillers. The tubes were twisted around a central reinforcing element - a 3.5 mm thick FRP rod. The whole structure has been additionally reinforced with fiberglass. Thanks to this, the maximum pulling force is 2500 N.

The outer shell is made of black HDPE plastic. The thickness of the entire cable is about 11,7 mm and the thickness of the sheath itself is about 1,95 mm. The tubes were surrounded by a blocking water tape, which further seals the whole cable. The outer shell has 2 ripcords for easy cable peeling.

Features

fiber optic cable for teletechnical sewage system;
144 G.652.D fibers;
multi-tube construction (12 tubes with 12 fibers per tube, without fillers);
central reinforcing element - FRP rod 3,5 mm thick;
maximum pulling force - 2500 N;
fiberglass reinforcement;
diameter 11,7 mm.

Specifications

Application / Construction
Z-XOTKtsdDb 144J
Application	Duct installation
Configuration	Loose tubes with 12 optical fibers per tube, filled with thixotropic compound Stranded loose tubes Central strength member made of fiber reinforced plastic (FRP, PE coated if necessary) Cable strand: dry, water blocking yarns and tape Peripheral strength member: glass yarns Outer sheath: Black HDPE, two red ripcords under the outer sheath
Temperature range	Storage and transport: -40 to +70°C Installation: -10 to +60°C Operation: -40 to +70°C
Standards	IEC 60793-1 IEC 60793-2 IEC 60794-3-10
Dimensions
Number of fibers	144
Loose tubes x fibers	12x12
Filler number	0
Loose tube Ø	1,8 mm
CSM Ø (central strengthening element)	3,5 mm
Outer sheath thickness	1,0 mm
Outer diameter (± 5%)	11,7 mm
Cable weight (± 15%)	118 kg
Mechanical Properties
Max. tensile load	2500 N
Crush resistance /10 cm	1000 N
Bending radius	Installation: 20x cable-Ø, Operation: 10x cable-Ø
Colour Code & Marking
Fiber Colors	1 - red 2 - green 3 - blue 4 - yellow 5 - white 6 - gray 7 - brown 8 - violet 9 - turquoise 10 - black 11 - orange 12 - pink
Tube Colors	1 - red 2 - green 3 - blue 4 - yellow 5 - white 6 - gray 7 - brown 8 - violet 9 - turquoise 10 - black 11 - orange 12 - pink
Optical fiber
Standard	ITU-T. G.652D
Fiber attenuation	@ 1310 nm ≤0.36 dB/km @ 1550 nm ≤0.22 dB/km
Mode field diameter (MFD)	9.2 ± 0.4 µm @ 1310 nm
Zero dispersion wavelength	1300~1324 nm
Zero dispersion slope	≤0.092 ps/nm² ∙km
Polarization mode dispersion (PMD)	≤0.2 ps/√km
Cable cut-off wavelength	≤1260 nm
Macro bending loss .. 100 turns Ø50 mm	@1550 nm ≤0.05 dB @1625 nm ≤0.10 dB
Coating diameter (Colored)	250 ± 15µm
Cladding diameter	125 ±1µm
Core/clad concentricity error	≤0.6µm
Cladding non-circularity	≤ 1.0%
Proof stress	≥ 0.69Gpa
Test Methods
Tensile strength IEC 60794-1-2 E1	Tensile strength: see Point 3 Sample length: ≥ 50m Test duration: 1 minute Fiber strain: ≤0.6% △α ≤0.05dB after test No damage
Crush resistance IEC 60794-1-2 E3	Crush: see Point 3 Test duration: 1 minute, number of tests: 3 △α ≤0.05dB after test No damage
Impact IEC 60794-1-2 E4	Impact energy: 1J, R = 300mm Number of points: 3, impact number: 1 △α ≤0.05dB after test No damage
Repeated bending IEC 60794-1-2 E6	Bending radius: 20x cable Ø 25 cycles △α ≤0.05dB after test No damage
Torsion IEC 60794-1-2 E7	Sample length: 2m ± 180°, 5 cycles △α ≤0.05dB after test No damage
Bend IEC 60794-1-2 E11	Mandrel diameter: 20x cable Ø 4 turns, 3 cycles △α ≤0.05dB after test No damage
Temperature cycling IEC 60794-1-2 F1	-40℃→+70℃ 12 hours per temp step, 2 cycles △α≤0.1dB/km
Water penetration IEC 60794-1-2 F5	Sample length:3m, water column height:1m Test duration:24h No water leakage