-
0,25 € netto
Protect your WISP site against power loss with the EdgePower EP-54V-72W, a convenient UPS device with dual PoE output ports. You can receive alerts in the event of a power outage, and the EP-54V-72W offers a 12V lead acid battery input (optional) for redundancy if the AC input fails over.
- 54 VDC Output
- Dual 54 VDC Passive PoE Output
- AC Input
- Optional 12V Battery Input
Local Web UI
The EdgePower Configuration Interface allows you to easily configure and monitor PSU features.
Ping Watchdog sets the EdgePower to continuously ping an IP address you define. If it is unable to ping, then the EdgePower will automatically reboot.
Remote Management
The EdgePower may be connected to the LAN for remote monitoring and configuration.
Use the UNMS (Ubiquiti® Network Management System) for remote management. You can also use SNMP to monitor the EdgePower for issues that warrant attention.
Specification
EP-54V-72W | |
Dimensions | 192 x 43.7 x 115 mm (7.559 x 1.72 x 4.528") |
Weight | 650 g (1.43 lb) |
Interfaces Networking |
(2) 10/100 Mbps RJ45 Ports |
Interfaces Management | Ethernet In-Band |
PoE Output | (2) 24VDC Passive PoE (Pins 4, 5+; 7, 8-) |
DC Output | 24V, 3A |
AC Input |
100-240VAC, 50-60 Hz, Universal Input |
Battery Input | DC Terminal Block |
Power Supply: AC Input |
AC/DC 72W |
Power Supply: Battery Input | 12VDC Lead Acid Battery (not included) |
Max Power Consumption |
System: 2W Output: 72W |
ESD/EMP Protection | Air: ± 12 kV, Contact: ± 12 kV |
Operating Temperature | 0 to 40° C (32 to 104° F) |
Operating Humidity | 10 to 90% Noncondensing |
Certifications | CE, FCC, IC |