Ubiquiti airFiber 5X HD is the successor of the popular airFiber 5X radio. The new version stands out for much better use of the 21.2 bps/Hz ( the old version: 17.1 bps / Hz) band , higher packet efficiency - up to 2 million p/s (the old version: 1 million p /s), a wider channel - up to 100 MHz (earlier: 50 MHz), and in the new software version, the 4096 QAM modulation will be available. The maximum theoretical bandwidth of the radio is 1 Gbps, the device is equipped with GPS synchronization. The new airFiber 5X HD is the most efficient radio available from Ubiquiti.

Go to the product

MikroTik CRS328-4C-20S-4S + RM is a managed switch with an dual boot option - optional SwitchOS system (simple Layer2 management) and RouterOS (advanced features). The device has 4 Combo ports (SFP / gigabit Ethernet), 20 SFP slots and 4 SFP + slots. The design is based on the Marvell 98DX3236A1 switch chip, the product has 512 MB RAM. An additional advantage are 2 built-in AC power supplies that work redundantly.

Go to the product

The DAC – type underground optical fiber cable is available again! It has 2, G.652.D fibers (other versions will be available soon), it is distinguished by a thick outer shell (~ 1.8 mm) and very strong FRP rods (~ 0.9 mm). The cable construction has been additionally reinforced with a large amount of aramid fibers. The outer shell is orange. The cable is sold on reels with a length of about 4 km (there is rewinding possibilit , find more information in the product description).

Go to the product

MikroTik M33G is a new RouterBOARD equipped with a dual-core MediaTek MT7621 processor with 880 MHz clock speed and 256 MB RAM. It has 3 Gigabit Ethernet ports, 2 miniPCIe slots and 2 SIM slots. In addition, 1 USB 3.0 ports, a microSD slot and an M.2 connector to mount the disk. The device is ideally suited as an efficient wireless router, and using the appropriate radio card, it will be great for 3G/4G networks.

Go to the product

Two wireless Ubiquiti routers joined our offer. The AirCube series devices have 4 Ethernet ports (Gigabit in AC version) and are enable the supply of PoE power on the WAN port. Thanks to this, it is possible to power for example the NanoStation Loco located on the roof. The ISP version is cheaper and operates in the 2.4 GHz (802.11n) band, while the AC can transmit the network in 2.4 GHz and 5 GHz bands according to the 802.11ac standard.

Ubiquiti airCube ISP
Ubiquiti airCube AC

Now in our offer- Opton RF-WDM55-SA - an active CATV converter! The device has been designed for the PON network, it bridges the broadcast transmission on 1310/1490 nm waves, and transmits on 1550 nm (CATV) waves to the RF port. The offered product is characterized by a wide signal range (47 - 862 MHz), placed in a metal housing , which additionally protects against the interference. The RF-WDM5- SA is an ideal solution for every operator using CATV technology.

Go to the product

The wAPG-60AD enables a wireless transmission in the 60 GHz band, in accordance with the IEEE 802.11ad standard. The device has a Gigabit Ethernet port and an integrated antenna, her main beam has a width of 60 °. The offered product has a RouterOS system with a Level 4 license, thanks to that it can be used as a base station for maximum 8 clients.

Go to the product

Another MikroTik CPE device compatible with the AC - DISC Lite5 ac standard joined our offer! It has been equipped with the recently popular IPQ-4018 processor and 256 MB of RAM. The antenna supports dual polarity (2x2 MIMO / dual-chain) and is characterized by a 21 dBi gain. The device is in a small size (diameter 26.5 cm) and has the same grip like the SXT series, so it is compatible with the quickMOUNT grips.

Go to the product

RouterBOARD wsAP 5Hac2nD is the first MikroTik access point for mounting on an electrical / telecommunications socket. It has fast Ethernet and telephone ports, it can be powered by PoE and provides also the PoE Pass-through. The device can simultaneously transmit the network in 2.4 and 5 GHz bands, it is compatible with the 802.11ac standard. We encourage you to familiarize yourself with the new products.

Go to the product

RouterBOARD hAP ac2 is a new wireless MikroTik router available at a very low price! The device supports the 802.11ac standard and the dual-chain polarization. It was equipped with a quad-core IPQ- 4018 processor with a frequency of 716 MHz and 128 MB of RAM. The offered producthas a RouterOS system with a Level 4 license.

Go to the product