-
1,08 zł netto
Ubiquiti AF11-COMPLETE-LB is a set consisting of the airFiber 11 radio, 11G35 antenna and Low Band duplexer. It operates in the frequency of 10700 - 11445 MHz, the maximum modulation is 1024QAM, and the channel width is 56 MHz. By using one duplexer you can use the SISO mode, and after adding another duplexer (there is only one in the set) you can use MIMO. In MIMO mode, the manufacturer's maximum bandwidth is 1.2 Gb / s.
The radio is equipped with a gigabit Ethernet port and SMA antenna connectors (a duplexer is put on the connector, from which the N connector comes out). It can be powered by passive PoE on all wires (1, 2, 4, 5+ / 7, 8, 3, 6-) or a DC terminal, a gigabit PoE power supply is included in the set. The input voltage is 38 - 56 V DC, and the maximum power consumption is 36 W. The antenna included in the set has a gain of 35 dBi, its diameter is about 81 cm. It is adapted to work in the 11 GHz band, it has double vertical and horizontal polarization. It is distinguished by a very narrow main beam with a width of 2.5 °, making it extremely resistant to interference caused by other transmissions.
The offered product has been designed to create efficient point-to-point connections in the licensed 11 GHz band. It is an affordable alternative to standard radio lines. Moreover, airOS software has been successfully developed for many years and is popular among operators.
The most important features:
- radio for operation in the 11 GHz band;
- antenna included (dish diameter 81 cm);
- energy gain 35 dBi;
- gigabit Ethernet port;
- one duplexer included (the device can work in SISO mode);
- main beam width - 2.5 °.
Specification:
AF11-Complete-HB | |
Features of the AF-11FX radio | |
---|---|
Genereal features | |
Dimensions | 327x112x86 mm |
Weight | 2,26 kg |
Antenna connectors |
4 SMA connectors: TX 0, RX 0 (Chain 0), TX 1, RX 1 (Chain 1) 2 N connectors (one per duplexer, only one included) |
Power method |
Passive PoE on wires 1, 2, 4, 5+ / 7, 8, 3, 6- DC jack |
Input voltage range | 38 - 56 V DC |
Maximum power consumption | 36 W |
ATPC (Automatic Transmit Power Control) | Yes |
Installation | Built-in pole mount |
LED lights |
8 LEDs: Data Port Link / Activity Management Port Link / Activity MIMO Mode RF Link 4 LEDs indicating signal strength |
Permissible working temperature | From -40 to 55 °C |
Certificates | CE, FCC, IC |
Ports | |
Data |
1 gigabit Ethernet port 10/100/1000 Mb / s |
Management |
1 fast Ethernet port 10/100 Mb/s |
Performance / Software | |
Processor | INVICTUS 2 IC |
Maximum theoretical throughput | 1,2 Gb/s |
Encryption | 128 bit AES |
Operating system | airOS F |
Wireless mode | SISO / MIMO |
Full duplex latency | < 200 μs at full bandwidth |
MTU (Maximum Transmission Unit) | Up to 9600 |
Frequency range |
Low channel: 10,700 - 10,955 GHz High channel: 11,200 - 11,445 GHz |
Maximum transmitting power | 30 dBm |
Frequency accuracy | ± 2.0 ppm |
Channel width | 3.5/5/7/10/14/20/28/30/40/50/56 MHz |
Duplexer Low-band |
Low channel: 10700 - 10955 MHz High channel: 11200 - 11445 MHz |
Suggested maximum transmitting power | |
10x (1024QAM) | 18 dBm |
8x (256QAM) | 21 dBm |
6x (64QAM) | 24 dBm |
4x (16QAM) | 30 dBm |
2x (4QAM) | 30 dBm |
1x (QPSK) | 30 dBm |
Features of the AF-11G35 antenna | |
General features | |
Dimensions |
Diameter 811 mm Depth 460 mm |
Weight |
Without handle: 7.14 kg With handle: 11,85 kg |
Frequency range | 10,3 - 11,7 GHz |
Signal gain | 35 dBi |
Beam width vertically | 2,5° |
Beam width horizontally | 2,5° |
Horizontal beamwidth Front-to-back power ratio | 60 dB |
Max. VSWR | 2:1 |
Wind resistance | 538 N at 200 km/h |
Polarization | Vertical and horizontal |
Orthogonal polarization isolation | 35 dB |
Installation | Pole |