-
0,25 € netto
IP-COM G5310P-8-150W is a switch equipped with 9 Gigabit Ethernet ports 10/100/1000 Mb/s and 1 SFP slot (1 Gb/s). On 8 Ethernet ports there is a PoE power output in the IEEE 802.3af/at standard. The maximum power per port, in accordance with the standard, is 30 W, the total power budget is 130 W. The device supports advanced Layer 3 management, e.g. static routing, ARP, routing based on VLANs, VLANs, DHCP Snooping, link aggregation, STP protocols or multicast support (IGMP Snooping). Management is available through a graphical web interface or in the cloud using IMS Cloud. IMS Cloud, in addition to convenient, remote management, is also a platform that allows centralized configuration of multiple devices at the same time. Thanks to this functionality, the G5310P-8-150W is perfect for networks using IP-COM access points. You will be able to manage the switch and AP from the same level, and at the same time use PoE power.
9 gigabit Ethernet ports (10/100/1000 Mb/s), 1 SFP slot (1 Gb/s)
The switch is equipped with 9 gigabit Ethernet ports 10/100/1000 Mb/s and 1 SFP slot. There is a PoE power output on the 8 Ethernet ports. The device is distinguished by a large packet buffer - 12 Mb, larger than in competing solutions.
An additional advantage is surge protection at the level of 6 kV, which protects all Ethernet ports and the power supply.
8 PoE outputs, 130 W power budget
On 8 Ethernet ports there is a PoE power output in the IEEE 802.3af/at standard. The maximum power, according to the standard, is 15.4 W for 802.3af devices and 30 W for 802.3at devices. This type of power supply is widely used in ICT devices, monitoring systems and VoIP phones.
The maximum PoE power budget (for all ports) is 130 W. It should be enough to power 8 access points, depending on their maximum consumption.
Layer 3 management, compatible with IMS Cloud
IP-COM G5310P-8-150W supports advanced Layer 3 management. It supports ARP, IPv4 static routing and VLAN based routing. It also supports DHCP Snooping, Spanning tree protocols (STP / RSTP / MSTP) and multicasy - IGMP Snooping. In addition, it also offers standard Layer 2 features such as QoS, VLAN support, access control lists (ACLs) and port aggregation.
You can manage the switch using the graphical web interface, but it is also compatible with the IMS Cloud system. The platform allows for centralized management of multiple devices at the same time, including access points. IMS Cloud will make it much easier for you to maintain a large network and provide remote access from anywhere.
The offered product is perfect for networks consisting of IP-COM access points. The IMS Cloud platform will allow you to manage all devices from one level, and the G5310P-8-150W will provide PoE power.
Specifications
IP-COM G5310P-8-150W | |
Hardware | |
---|---|
Standards |
IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3ad, IEEE802.3z, IEEE802.3x, IEEE802.1p, IEEE802.1q, IEEE802.1w, IEEE802.1d, IEEE802.1s, IEEE802.3af/at |
LED indicators | One Link/Act or PoE LED indicator for each port One Link/One Link/Act mode converting LED indicator for each device One PoE mode converting LED indicator for each device One PoE Max LED indicator for each device One Power LED indicator for each device One SYS LED indicator for each device |
Interfaces | 8 x 10/100/1000 Base-T Ethernet ports (Data/Power) 1 x 10/100/1000 Base-T Ethernet ports (Data) 1 x 1000 Base-X SFP ports (Data) |
Lightning protection | Port: 6kV Power: 6kV |
Forwarding mode | Store-and-forward |
Switching capability | 20 Gb/s |
Packet forwarding rate | 14,9 Mp/s |
Buffer | 12 Mb |
MAC address table | 16K |
PoE power supply | Ports 1 to 8 support IEEE 802.3af/at standard PoE power supply 1 2 4 5 +, and 3 6 7 8 - |
Power consumption | Whole switch consumption: <150W Maximum PoE output power: 130 W |
Input voltage |
100 - 240 V AC 50/60 Hz |
Dimensions | 294 x 179,6 x 44 mm |
Operating temperature | 0°C - 40℃ |
Storage temperature | -40°C - 70°C |
Operating humidity | (10% - 90%)RH, non-condensing |
Storage humidity | (5% - 90%)RH, non-condensing |
Software | |
PoE power supply management | Supports port PoE configuration and power supply with priority Supports PoE over-temperature protection Supports PoE scheduled management Supports intelligent management and PoE-powered device detection (port status, power assignment and PoE-powered device status) |
Security features | Supports ARP receiving limit Supports unknown MAC address discard Supports DoS attack defense Supports 802.1x security authentication Supports Radius authentication |
VLAN | Supports IEEE 802.1Q VLAN Supports VLAN Layer-3 interfaces Supports three port modes: Access, Trunk and Hybrid |
DHCP | Supports DHCP Relay Supports DHCP Snooping Supports Option 82 policy configuration |
L3 Routing | Supports VLAN-based routing Supports IPv4 static routing Supports static ARP |
Port aggregation | Supports static aggregation Supports LACP dynamic aggregation |
Spanning tree | Supports IEEE 802.1d STP (Spanning Tree Protocol) Supports IEEE 802.1w RSTP (Rapid Spanning Tree Protocol) Supports IEEE 802.1s MSTP (Multiple Spanning Tree Protocol) Supports edge port Supports BPDU statistics |
Multicast | Supports IGMP Snooping V1/V2/V3 Supports port fast leave |
Port mirroring | Supports N: 1 port mirroring |
QoS | Supports SP (Strict Priority) Supports SWRR (Simple Weighted Round Robin) Support WRR (Weighted Round Robin) Supports 802.1p port trust mode Supports DSCP port trust mode Supports a maximum of 8 queue service quality mapping |
ACL | Supports MAC ACL Supports IP ACL |
Loading and upgrade | Supports FTP/TFTP/HTTP upgrade Supports configuration import and export |
Cloud management | Supports configuration delivery from IMS cloud platform Supports log reporting and fault detection Supports remote maintenance: reboot, backup, upgrade |
Local visualization management | Supports router, switch, AP, IP camera discovery Supports automatic generation of topology Supports online/offline status detection for devices Supports remotely rebooting the IP camera |
Management and maintenance | Supports Telnet configuration, Console port configuration Supports SNMP V1/V2/V3 Supports WEB management and maintenance Supports Ping/Tracert Detection Supports Cloud management Support visual management of LAN |