Tenda K4P-4CR is a set designed for monitoring, it consists of an net video recorder, 4 IP cameras and additional accessories. The attached recorder supports 4 channels, H.265 encoding and bitrate up to 60 Mb/s. You can connect a hard drive with a maximum capacity of 10 TB to it. The device has 4 fast Ethernet output ports (10/100 Mb/s), which also have a PoE power output. Thanks to this, you can connect to the recorder and power all 4 cameras at the same time, without the need for additional power supplies or switches. On the output, the device supports a resolution of 3840x2160 (HDMI port), live view and playback of recordings is possible even on 4K TV sets, without loss of quality.

The included IP cameras are intended for indoor use. Each of them has a 4 Mpix lens with a diameter of 4 mm, the maximum image resolution is 2560x1440 px, and the viewing angle is 74.9° horizontally, 41.3° vertically (88.2° diagonal). The camera uses H.265 compression, it is also supported by the recorder, thanks to which the saved files are much smaller than in the older H.264 standard. The device has a night mode, the range of which is 30 m (based on IR diodes). The camera supports useful alarm functions: motion detection, human recognition and camera tampering detection.

You can manage the set using the web graphical interface or the application available for mobile devices with Android and iOS. The set includes 2 Ethernet patchcords with a length of 18 m and 2 with a length of 30 m. In some locations, with the help of the included accessories, you can quickly start monitoring without using additional switches, power supplies or even an Ethernet cable.

A set necessary to create a monitoring system

The offered product is a set consisting of an NVR, 4 IP cameras, an Ethernet patch cord 1 m long, 2 Ethernet patch cords 18 m long, 2 Ethernet patch cords 30 m long and the necessary accessories. With the help of these products, you can create a monitoring system, in some locations even without using additional elements. All you need are the necessary tools.

Net Video Recorder with PoE outputs

The NVR included in the set has 4 fast Ethernet ports, on which there is a PoE power output in the IEEE 802.3af standard. Thanks to this, you can connect the cameras directly to the recorder, without the need for an additional switch or power supply. Installation is very simple and quick. Just connect the NVR to the power source, then the cameras to the recorder and you can start the whole system.

Cameras with 4 Mpix, 4 mm lens

The IP cameras included in the set are equipped with 4 Mpix lens with a diameter of 4 mm. They allow you to record images with a resolution of 2560 x 1440 px (QHD), provide good quality and the ability to see many details. You will feel the difference especially when comparing them to cameras with 2 / 3 Mpix lenses, which were once widely used. The device uses DWDR technology to improve image quality in unfavorable lighting conditions and 3D DNR to reduce noise. The cameras are also equipped with built-in IR LEDs, the maximum range in night mode (black and white) is 30 m. The viewing angle is 74.9° horizontally and 41.3° vertically (88.2° diagonal).

HDMI connector, 4K UHD resolution on output

The NVR has an HDMI connector and supports the output resolution of 3840 x 2160 px (4K UHD). Thanks to this, playback of recordings or using live view will look good on any screen, even if you use a large-diagonal TV. You will see high quality especially when playing 4 channels simultaneously.

Hard disk with a maximum capacity of 10 TB

You can connect a hard drive with a maximum capacity of 10TB, the NVR has one SATA 3.0 connector. The device supports detecting and avoiding bad disk sectors, which ensures the continuity of recordings without losing any frames.

Attention! There is no hard drive included, please purchase it separately!

Human detection

Tenda K4P-4CR has a human recognition function. The advanced algorithm effectively filters all elements that do not have a human shape and ensures that the right information is transmitted without false positives. When detected, you can get an in-app notification.

The ability to record recordings in the cloud

The product offered is compatible with Tenda's cloud (Cloud Storage). Depending on the plan you choose, the service can keep recordings from the last 7 or 30 days. Using the cloud is paid, but it has many advantages, first of all, the recordings are preserved in the event of physical damage to the disk. A possible thief / intruder may deliberately destroy the recorder, using Cloud Storage you do not have to worry that all data will disappear. registering recordings in the cloud

Web or app management

The device provides the ability to manage using the Web graphical interface, without the need to install additional plug-ins. This allows for simple and quick configuration of the entire system - you do not need to download any software. An app for Android/iOS mobile devices is also available. The application allows you to play recordings and view live images, supports alarm notifications, and is also the easiest way for remote management.

Specifications