-
0,25 € netto
The Ubiquiti UVC-AI-DSLR-LD is an IP camera designed to work under the UniFi Protect system. It features an advanced M. Zuiko Digital ED lens with a diameter of 45 mm. The horizontal field of view is 21.6°, and the vertical field of view is 16.2° (diagonal 27°). It is narrower than the UVC-AI-DSLR version and significantly slimmer than standard IP cameras. However, it offers a large recording range and high brightness with an aperture of f/1.2. The maximum recording resolution is 3840 x 2160 px, equivalent to 4K (8 Mpix). The device includes a 1-gigabit Ethernet port, serving simultaneously as a Power over Ethernet (PoE) input. It supports the IEEE 802.3at standard, with a maximum power consumption of 17.77 W. In the package, you will find an additional enclosure. When installed, it raises the protection rating to IPX5, allowing the device to be used outdoors.
The camera is designed to operate in highly demanding locations. The employed lens ensures good image quality, even in challenging lighting conditions. An additional advantage is the advanced software features, including people recognition and license plate reading. With the accessories included in the package, the device can be mounted on a wall or pole.
8 Mpix, 17 mm lens
The UVC-AI-DSLR-LD features an M. Zuiko Digital ED lens with a diameter of 45 mm. The field of view is slightly narrower than the UVC-AI-DSLR version and significantly slimmer than standard 2.8/3.6 mm cameras, measuring 21.6° horizontally and 16.2° vertically (diagonal 27°). In exchange, the UVC-AI-DSLR-LD offers a very large image recording range.
The lens aperture (f-stop) of the UVC-AI-DSLR-LD is F/1.2, allowing significantly more light to enter compared to standard IP cameras. This feature ensures much better image quality than competitive solutions. The maximum recording resolution is 4K - 3840 x 2160 px.
Power over Ethernet (PoE), Gigabit Ethernet port
The device is equipped with a 1-gigabit Ethernet port (10/100/1000 Mb/s), which simultaneously serves as a Power over Ethernet (PoE) input. It supports PoE+ power, following the IEEE 802.3at standard. The maximum power consumption is 17.77 W.
Intelligent detection, built-in microphone, and speaker
The offered product supports intelligent detection features, enabling the recognition of vehicles and people, as well as reading license plates. An additional advantage is the built-in microphone and speaker, allowing for two-way voice communication. Sound recording can be disabled through the software interface.
Note! The microphone and speaker are disabled after installing the external housing.
Outdoor Building Mounting Enclosure
In the package, you will find an additional housing that you can install if you plan to use the UVC-AI-DSLR-LD outdoors. When the housing is applied, the protection rating is IPX5, making the device resistant to water ingress and adverse weather conditions.
With the accessories included in the package, you can mount the camera on a wall or pole. The applied ball joint bracket allows for smooth adjustment of the tilt in three planes. Additionally, the camera has a bottom bracket for mounting on a photographic tripod.
UniFi Protect platform
The camera is compatible with the UniFi Protect platform, enabling centralized management of multiple devices. Access to UniFi Protect can be obtained through a program available on PC or a mobile application for Android/iOS devices. The platform provides an easy way to preview live footage and play back recorded videos. It also allows for the full configuration of connected devices and the installation of additional ones. UniFi Protect is highly scalable; after the initial setup, the system automatically detects and facilitates the quick connection of additional hardware.
Specifications
Ubiquiti UVC-AI-DSLR-LD | |
Mechanical | |
---|---|
Dimensions |
Without mount: Ø80 x 89 mm (Ø3.1 x 3.5") With mount: Ø80 x 153 mm (Ø3.1 x 6")
Lens: Ø70 x 84.9 mm (Ø2.8 x 3.3") Outdoor case: Ø91.6 x 196.3 mm (Ø3.6 x 7.7") |
Weight |
Without mount: 660 g (1.5 lb) With mount: 820 g (1.8 lb)
Lens: 410 g (0.9 lb) Outdoor case: 510 g (1.1 lb) |
Enclosure material | Aluminum alloy |
Mount materials | Aluminum alloy |
Weatherproofing | IPX5 (With the outdoor case) |
Optics | |
Sensor | 4/3" 10MP CMOS sensor |
Lens | M. Zuiko Digital ED 45 mm f/1.2 PRO |
View angle | 21.6° (H), 16.2° (V), 27° (D) |
Video | |
Video compression | H.264 |
Resolution | 8MP 3840 x 2160 (16:9) |
Max. frame rate | 30 FPS |
Image settings | Color, brightness, sharpness, contrast, white balance, exposure control, 2DNR/3DNR/NR by motion, masking, text overlay |
System | |
Processor | Quad-core Arm® Cortex®-A53 based chip |
Networking interface |
1 gigabit Ethernet port 10/100/1000 Mb/s |
Max. power consumption | 17.77W (with lens working) |
Power method | PoE+ (IEEE 802.3at) |
Supported voltage range | 37 - 57 V DC |
Buttons | Factory reset Lens release key |
Mounting | Wall, pole mount (included) Tripot mount |
Operating temperature | -20 to 40° C (-4 to 104° F) |
Operating humidity | 10 to 90% noncondensing |
Audio | |
Microphone |
Yes* (Can be disabled.) *Audio function will be disabled when using its outdoor case. |
Speaker |
Yes* *Audio function will be disabled when using its outdoor case. |
Software | |
Web application | UniFi Protect: Version 2.2.2 and later |
Mobile app | UniFi Protect iOS™ and Android™: Version 1.7.0 and later |