Huawei ETP4860-B1A2 embedded power supply 48V 2000W, SMU11B controller, R4815G1 rectifiers

Huawei ETP4860-B1A2 embedded power supply 48V 2000W, SMU11B controller, R4815G1 rectifiers

Brand: Huawei

Product Code: HUA-ETP4860-B1A2B215

Catalog number: 9946

Warranty (months):

Price

666,90 €

820,29 € incl. tax

favoriteAdd to wishlist

Description

The offered product is a Huawei ETP4860-B1A2 telecom power supply unit, equipped with an SMU11C controller and two R4815G1 rectifiers. It is designed to power various types of telecommunication devices with buffer backup support. It has 5 output connectors (LOAD1 - LOAD5) and 1 connector for connecting external batteries (BATT). The input supports standard AC voltage (full range 85 - 300 V AC). The output voltage ranges from 42 to 58 V DC, with a nominal voltage of 53.5 V DC. The package includes two R4815G1 rectifiers, each with a power output of 1000 W, providing a total power of 2000 W for the entire power system. The device does not support adding an additional rectifier.

The device is equipped with an SMU11B controller featuring signal and alarm connectors. Communication is facilitated through an RJ45 console port and a Fast Ethernet port. It supports management via a graphical web interface.

Embedded power supply with 5 outputs

ETP4860-B1A2 is a telecommunications power system equipped with 5 output connectors for connecting loads. Next to them, there is a battery connector (BATT) for connecting external batteries. By using batteries, you can provide backup power to the entire system. In case of a main power failure, the device will switch to battery operation. The output voltage range is 42 to 58 V DC, with a nominal voltage of 53.5 V DC.

Two R4815G1 rectifiers

In the package, you will find two rectifiers, R4815G1, each with a power rating of 1000 W, totaling 2000 W. The telecommunications power system has two slots for rectifiers, so you cannot add another one. The input voltage range is 85 - 300 V AC, with a nominal voltage of 220 V AC, 50/60 Hz. R4815G1 rectifiers are hot-swappable and feature active cooling with built-in fans. They are distinguished by their high efficiency, which exceeds 95%.

SMU11B module, Web management

The SMU11B control module features input signals (including connections for battery temperature sensor and battery voltage) and alarm outputs. It communicates via one RJ45 console port and one fast Ethernet port (10/100 Mb/s). The module does not include an LCD display and can be managed through a graphical web interface.

Specifications

System
ETP4860-B1A2
Dimension	442 mm (W) × 255 mm (D) × 43.6 mm (1U,H)
Weight	≤ 4 kg (without rectifiers)
Cooling Mode	Natural cooling
Installation Mode	Installed on 19-inch rack or cabinet
Cabling Mode	Front inlet and front outlet
Maintenance Mode	Front
Protection Level	IP20
Input
Input Mode	220 V AC single phase or 110 V AC dual-live wire
Input Voltage	85–300 V AC, rated value: 220 V AC
Input Frequency	45–66 Hz, rated value: 50/60 Hz
Output
Output Voltage	42–58 V DC, rated value: 53.5 V DC
Maximum Capacity	4 kW
Battery Breakers	1 × 50 A/1P
LLVD Breakers	-
BLVD Breakers	4 × 32 A/1P, 1 × 16 A/1P
SPD	-
Environment
Operating Temperature	-40ºC to +65ºC
Storage Temperature	–40℃ to +70℃
Operating Humidity	5% – 95% (non-condensing)
R4815G1 Rectifier
Efficiency	> 95% (30% to 90% load) > 96% Max
Maximum Power	1000W (176 to 300 V AC)
Input Voltage	85 to 300 V AC / 85 to 400 V DC
Working Temperature	-40 ℃ to +75 ℃ (full output below 55℃), ETS EN 300-019
Dimension	95.5 mm(W) × 208 mm(D) × 40.8 mm(H)
Weight	≤1.2 kg
Cooling Mode	Forced Air cooling (Built-in fan)
Power Factor	≥ 0.98 (> 50% load at 230 V AC)
THD	≤ 5% (> 65% load at 230 V AC)
SMU11B Controller
Signal Input	5 DI, 1 gate,1 Btemp, 1 Etemp, 2 battery mid-point voltage detection
Alarm Output	2 DO (compatible with DI)
Communication Port	CAN, RS485(northbound), RS485(southbound)
Display Mode	No LCD, web management