Polski
English
Italiano
Español
Čeština
Српски
Deutsch
Ελληνικά
Slovenský
-
6,41 Kč netto
Ubiquiti Gate Access Starter Kit
Price
15 307,47 Kč
18 828,19 Kč incl. tax
favoriteAdd to wishlist
The Ubiquiti Gate Access Starter Kit is a starter set designed to control a gate within the UniFi Access system. The kit includes a hub, intercom, PoE++ power adapter, and a PoE extender. The hub has connectors for connecting the gate and its open/close sensors. It features 5 Gigabit Ethernet ports, with the first providing PoE++ input and the remaining 4 offering PoE+ output. The set comes with a compatible power adapter, so you don’t need a switch that supports PoE++. The PoE extender helps if the gate is located at a significant distance from the building. The PoE+ output ports allow you to connect the intercom directly and up to 2 IP cameras. The starter kit enables the automation of the gate, which can be opened using the UniFi Identity app, NFC card, or PIN code. The intercom also supports video calls, which guests can use. Optionally, you can install compatible UVC AI series cameras that will read license plates; once a recognized plate from the list is detected, the gate will open automatically.
UniFi Access Gate Control Kit
The kit is designed for controlling the opening of a gate or barrier, depending on the place of use. It is ideal for corporate buildings that have networks based on UniFi solutions, but individual users will also appreciate it. With the accessories included in the kit, you can open the gate using the UniFi Identity app, NFC card, or PIN code. Visitors can also make a call requesting the gate to be opened.
AI Camera Connectivity
You can connect UVC AI series cameras to the hub, which will enable the reading of license plates from incoming vehicles. Once a previously defined vehicle is recognized, the gate will open automatically without the need to use the intercom.
UA-Hub-Gate
The kit includes a Hub equipped with connectors for connecting the gate, as well as 5 Gigabit Ethernet ports. The first port features a PoE++ power input, and an appropriate power adapter is included with the device. The remaining 4 ports provide PoE+ power output. This allows you to connect the intercom and cameras directly to the Hub without the need for additional power adapters or PoE switches.
The device's casing is designed for DIN rail mounting, and the Hub should be used indoors. If you plan to install it outdoors, you must use an additional weatherproof box or enclosure.
UA-Intercom
The intercom features a 7" touchscreen, built-in microphone, speaker, and an 8 MP (4K) camera. It supports two-way voice communication, and visitors can use a button to make a call. The camera allows monitoring of the area in front of the gate and helps verify visitors. A numeric keypad is included for entering PIN codes, and most settings can be selected via the touchscreen. Additionally, the intercom has an integrated NFC reader.
The casing is designed for outdoor use (IP65 protection rating). The device should be mounted on a wall, with an Ethernet port on the back that also serves as the power input.
PoE Extender Included
The included PoE extender allows you to extend the PoE range by using a 2-wire power cable. One part of the extender serves as the PoE input, while the other acts as the output, to which the target device should be connected. A high-quality, properly gauged 2-wire cable can carry power over long distances, which is especially useful if the intercom is located far from the building where the hub is installed.
Specifications
| Ubiquiti UA-SK-Gate | |
| UA-Hub-Gate | |
|---|---|
| Mechanical | |
| Dimensions | 175 x 126 x 26 mm (6.9 x 5 x 1") |
| Weight | 460 g (1 lb) |
| Enclosure material | Polycarbonate |
| Mounting | Din-rail (Included) |
| Hardware | |
| Networking interface | (5) 10/100/1000 Base-T |
| Power method | PoE++ |
| Max. power consumption | Without PoE output: 22W With PoE output: 50W |
| PoE input | 50 V DC, 1 A |
| PoE output | PoE passthrough, (4) PoE, 50V DC, Max. 28W |
| Button | (1) Factory-reset |
| Digital input | Gate exit request, gate position, side door exit request, side door position, emergency |
| Dry output relay | (2) Operator: rated 30V DC, up to 1A (1) Aux: rated 30V DC, up to 1A |
| Powered output relay | Side door lock: 12V DC, up to 1A |
| Operating environment | Indoor use only with device itself Outdoor use with waterproof junction box |
| Ambient operating temperature | -30 to 60° C (-22 to 104° F) |
| Ambient operating humidity | 5 to 90% noncondensing |
| LEDs | |
| PoE in | Steady white: Pending adoption Steady blue: Adopted, device is ready Blinking white/blue: Upgrading firmware |
| PoE out | Off: Not connected or no data link Steady white: Connected and data link on |
| Input terminals | Off: No wire Steady white: Wire connected Blinking white: Active signal |
| Output relays | Off: No wire Steady white: Wire connected Blinking white: Relay triggered |
| UA-Intercom | |
| Mechanical | |
| Dimensions | 324.8 x 113.7 x 28.3 mm (12.8 x 4.5 x 1.1") |
| Weight | Device: 965 g (2.1 lb) Bracket: 445 g (1 lb) |
| Enclosure material | Aluminum alloy, UV-stabilized polycarbonate, glass |
| Mount material | Powder-coated stainless steel |
| Mounting | Wall mount, adapter to the gooseneck pedestal (Included) Surface angle mount, flush mount (Optional) Sunshield kit (Optional) |
| Weatherproofing | IP65 |
| Hardware | |
| Networking interface | (1) GbE RJ45 port |
| Connectivity |
Bluetooth 4.2 NFC |
| Power method | PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU |
| Supported voltage range | 48 V DC |
| Max. power consumption | 13 W |
| ESD/EMP protection | Air: ±15kV, contact: ±8kV |
| Sensors | Proximity sensor ALS sensor |
| Camera | 3264 x 2448, 8 MP H: 79.4°, V: 97.5°, D: 118.2° |
| Display | 177 mm (7") diagonal |
| Resolution | 1024 x 600 (16:9) |
| Display luminance | Max. 1000 nits (typical) |
| Touch screen technology | Capacitive multi-touch |
| Microphone | Yes |
| Speaker | (1) 4 ohm, 2W |
| LEDs | (1) LCM low temperature indicator: orange (LCM turned off when it’s below -25° C but the system funtions normally) (1) LED floodlight (13) Keypad LED backlight |
| Button | (1) Factory-reset |
| NFC frequency | 13.56 MHz |
| NFC read range | < 30 mm |
| NFC standards | ISO 14443A, 14443B, 15693 |
| NFC technology | NFC Tag 1,2,3,4,5 MIFARE Classic MIFARE Plus MIFARE Ultralight MIFARE DESFire |
| Ambient operating temperature | Device: -30 to 60° C (-22 to 140° F) Display:* -25 to 60° C (-13 to 140° F) *The display will turn off when the ambient temperature is above/below the display operation temperature, but other functions will remain functional. (Effective after firmware v 1.0.66) |
| Operating environment | Outdoor use |
| Ambient operating humidity | 5 to 90% noncondensing |
| UACC-Extender-2Wire-PoE-Tx/Rx | |
| Mechanical | |
| Dimensions | 40 x 105 x 25 mm (1.6 x 4.1 x 1") |
| Weight | PoE in: 77 g (2.7 oz) PoE out: 79 g (2.8 oz) |
| Enclosure material | Polycarbonate |
| Mounting material | Polycarbonate |
| Hardware | |
| Networking interface | 1) 10/100 MbE (1) Homeplug AV |
| Power method | PoE++ |
| Max. power consumption | 3W (Without PoE output) |
| PoE input | (1) PoE++, 50V DC, Max. 1.2A |
| PoE output | (1) PoE+, 48V DC, 0.72A |
| ESD/EMP protection | Air: ±8kV, contact: ±4kV |
| LED | Whte |
| Ambient operating temperature | -10 to 40° C (14 to 104° F) |
| Ambient operating humidity | 5 to 95% noncondensing |
| U-PoE++ | |
| Dimensions | 106 x 63 x 34 mm (4.2 x 2.5 x 1.3") |
| Weight | 210 g (7.4 oz) |
| Output voltage | 48V DC @ 1.25A |
| LAN activity indicator | No |
| Gigabit LAN port | Yes |
| Remote reset capability | No |
| Reset button | No |
| Rated voltage | 100 - 240 V DC, 50/60 Hz |
| Input current | 1.3A @ 120V AC 0.75A @ 230V AC |
| Inrush current | <100A peak @ 120V AC <200A peak @ 230V AC |
| Efficiency | 85+% |
| Output ripple | 1% max. |
| Switching frequency | 65 kHz |
| Line regulation | ≤ 1% |
| Load regulation | ≤ 3% |
| 2-pair powering | No |
| 4-pair powering | Pins 1, 2, 4, 5 (+) and 3, 6, 7, 8 (-) |
| AC connector | IEC-320 C6 |
| Data In / PoE | RJ45 shielded socket |
| Surge protection | Difference and common mode |
| Clamping protection | 11V data, 60V power |
| Max. surge discharge | 1500A (8/20 μs) power |
| Peak pulse current | 36A (10/1000 μs) data |
| Shunt capacitance | < 5 pF dla danych |
| Response time | < 1 ns |
| Power method | Universal AC input, 100—240V AC, 50/60 Hz |
| Power supply | AC/DC |
| Supported voltage range | 100—240V AC |
| Max. PoE+ wattage per port by PSE | 60 W |
| Ambient operating temperature | 0 to 40° C (32 to 104° F) |
| Storage temperature | -30 to 70°C (-22 to 158° F) |
| Ambient operating humidity | 10 to 95% noncondensing |
Other products in the same category that you may find interesting: