Polski
English
Italiano
Español
Čeština
Српски
Deutsch
Ελληνικά
Slovenský
-
1,08 zł netto
Eltek Flatpack2 Rectifier Module 48/3000 241119.100
Archived product
Additional power module (rectifier) for the Flatpack2 gym with a power of 3000 W.
Specification:
| Prostownik Flatpack2 48/3000 | |
| Input parameters | |
|---|---|
| Voltage | 85 - 300 V AC (nominal176 - 275 V AC) |
| Frequency | 45 - 66 Hz |
| Maximum current | 19,2 A rms maximum at nominal input voltage and full load |
| Power factor | > 0.99 at 50% load or greater |
| Protections |
fuse on both lines disconnection above 300 V AC |
| Output parameters | |
| Voltage | 53,5 V DC (adjustable range: 43,5 - 58 V DC) |
| Power | 3000 W at nominal input voltage |
| Maximum current | 62.5 A at 48 V DC and nominal input voltage |
| Current spliting | ± 5% of maximum at 10-100% load |
| Static voltage regulation | ±0,5% at load 10-100% |
| Dynamic voltage regulation | ± 5.0% for 10-90% or 90-10% load changes, control time <50 ms |
| Holding time | > 30 ms, output voltage> 43.5 V DC at full load |
| Interference and noise |
<100 mV ptp 30 MHz bandwidth <2.0 mV rms psophometric |
| Protections |
Overload shutdown fuse short circuit protection high temperature protection |
| Others | |
| Efficiency | 93%, minimum 92% with a load of 25-100% |
| Insulation |
3.0 kV AC - input and output 1.5 kV AC - input and ground 0.5 kV DC - output and ground |
| Alarms |
Low power shutdown high temperature shutdown rectifier error shutdown at output overvoltage fan error low voltage (43.5 V) CAN bus error |
| Warnings |
Low temperature rectifier in power limitation battery current limit active too high voltage flickering when overvoltage cut-off loss of communication with CAN |
| LED diodes indication |
Green LED: the device is working, no errors yellow LED: device warning red LED: device error |
| Working temperature | from -40 to 75 °C |
| Storage temperature | from -45 to 85 °C |
| Cooling | 2 fans (airflow from front to back) |
| Fan speed | adjustable |
| MTBF | > 300,000 hours Telcordia SR-332 1st edition method III (a) (T ambient: 25 ° C) |
| Volume level | <65 dB at nominal input voltage and full load (ambient T <30 ° C) |
| Humidity |
Working: 5% - 95% RH non-condensing Storage: 0% - 99% RH non-condensing |
| Dimensions | 109x41,5x327 mm |
| Weight | 1,9 kg |
| Standards | |
| Electrical safety |
IEC 60950-1 UL 60950-1 CS 22,2 |
| EMC |
EN61000-6-1 EN61000-6-2 EN61000-6-3 EN61000-6-4 |
| Harmonics | EN61000-3-2 |
| Environmental |
ETSI EN 300 019-2 ETSI EN 300 132-2 RoHS |
Customers who bought this product also purchased
Other products in the same category that you may find interesting: