-
1,06 zł netto
![Backhaul radio Mimosa B11 10-11,7GHz](galerie/b/backhaul-radio-mimosa-b11-10_22246_k.jpg)
![Backhaul radio Mimosa B11 10-11,7GHz](galerie/b/backhaul-radio-mimosa-b1_18577_k.jpg)
![Backhaul radio Mimosa B11 10-11,7GHz](galerie/b/backhaul-radio-mimosa-b1_18578_k.jpg)
Overview
The Mimosa B11 backhaul radio is designed for the modern Internet era, adapting instantly to variable
upstream and downstream bandwidth requirements. The B11 is fber-ready — simply add your preferred SFP
module and you’ll be lit up with gigabit fber speeds. If you are not quite ready for fber, the B11 also comes with a
standard gigabit Power-over-Ethernet connection.
We’ve simplifed the licensing process and offer instant visibility into the FCC ULS database to quickly assess
surrounding links, providing an early indication of coordination viability. A single B11 can support an entire
10.0–11.7 GHz band, maximizing your ability to fnd a clear, licensable channel.
Specifications:
MIMOSA-B11 | |
Max Throughput | Up to 1.5 Gbps IP aggregate UL/DL (1.7 Gbps PHY), 750 Mbps IP aggregate running in TDMA-FD mode typically required in ETSI markets |
Low Latency | < 1 ms |
Wireless Protocols | TDMA, TDMA-FD |
Radio | |
---|---|
MIMO & Modulation | 4x4:4 MIMO OFDM up to 256QAM |
Bandwidth | Single or Dual 20/40/80 MHz channels |
Frequency Range | 10000-11700 MHz restricted by country of operation |
Max Output Power | 27 dBm |
Sensitivity ( MCS 0 ) | -87 dBm @ 80 MHz -90 dBm @ 40 MHz -93 dBm @ 20 MHz |
Power | |
Max Power Consumption | 30 W |
System Power Method | 48 V DC 802.3 at compliant power injectors |
System Lightning & ESD Protection | 6 kV |
PoE Power Supply | Passive POE compliant, 48-56 V Power over Ethernet supply with IEC61000-4-5 surge protection |
Physical | |
Dimensions | Height: 260 mm (10.2") Width: 158 mm (9.6") Depth: 70 mm (2.8") |
Weight | 2 kg (4.5 lbs) |
Enclosure Characteristics | Outdoor UV stabilized plastic Aluminum mounting panel |
Wind Survivability | 200 km/h (125 mph) |
Wind Loading | 9.89 Kg @ 160 km/h (21.8 lbs @ 100 mph) |
Mounting | Direct connect to circular dual polarized antenna |
Network Interfaces | Single connection ethernet or fiber |
Environmental | |
Outdoor Ingress Protection Rating | IP67 |
Operating Temperature | -40°C to +55°C (-40°F to 131°F) |
Operating Humidity | 5 to 100% condensing |
Operating Altitude | 4420 m (14500') maximum |
Shock & Vibration | ETS 300-019-2-4 class 4M5 |
Features | |
Gigabit Ethernet | 10/100/1000-BASE-T |
Fiber Capable | SFP Cage included Radio accepts either copper Ethernet or SFP but does not support simultaneous operation |
Dual Protocol Operation | 2 dual-stream radios operating on non-contiguous frequencies allow for traditional FDD-like performance or TDMA Automatic load balancing of traffic across 4 total MIMO streams with individual stream encoding up to 256 QAM |
Management Services | Mimosa cloud monitoring and management SNMPv2 & Syslog legacy monitoring HTTPS HTML 5 based Web UI 2.4 GHz 802.11b/g/n radio for local management access |
Smart Antenna Alignment | Hands-Free dedicated 2.4 GHz Wi-Fi management radio |
Smart Spectrum Management | Active scan monitors/logs ongoing RF interference across channels (no service impact) Dynamic auto-optimization of channel and bandwidth use |
Security | 128-bit AES PSK with hardware acceleration |
QoS | Supports 4 pre-configured QoS levels |
GPS Location | GNSS-1 (GPS + GLONASS) |
Colocation Synchronization | 1PPS GPS TX/RX synchronization for colocated co-channel radios Adjustable up/downstream bandwidth ratio |
Regulatory + Compliance | |
Approvals | FCC Part 101 |
RoHS Compliance | Yes |