-
0,25 € netto
Ubiquiti AF60-HD is a wireless device adapted to work in the 60 GHz band. Depending on local regulations, it can operate in the frequency of 57 - 66 GHz, the channel bandwidth is 2160 MHz. The device enables the channel bonding and the maximum use of a channel with a width of 4320 MHz. Thanks to this functionality, the maximum throughtput can be as high as 6 Gb/s. In order to achieve such high speed, the new airFiber, in addition to the standard gigabit Ethernet port, also has an SFP+ slot (10 Gb/s). According to the manufacturer, the maximum transmission range is 2 km. The device can only work in the bridge mode, with a 50/50 uplink / downlink ratio.
High performance
The device is equipped with a 4-core ARM processor, with 1.6 GHz frequency and 2 GB of DDR4 RAM memory. This translates into very high efficiency of the entire system, at the same time ensuring trouble-free operation. Thanks to the AF60-HD you will forget about situations where the CPU reaches 100% load with higher traffic!
Bandwidth up to 6 Gb / s, range up to 2 km
The AF60-HD enables the channel bonding, thanks to which it can use a channel with a total width of up to 4320 MHz. This allows for a bandwidth of as much as 6 Gb / s, much higher than in the case of competing solutions. The transmission is carried out in the interference-free 60 GHz band. The maximum transmission range can be 2 km, but you should be aware of the physical limitations of this frequency, especially the effect of precipitation.
1 SFP+ slot (10 Gb/s), 1 Gigabit Ethernet port (10/100/1000 Mb/s)
To take full advantage of the offered wireless bandwidth, the device has been equipped with an SFP+ slot, with a speed of up to 10 Gb/s. In addition, the slot can also work in the 1 Gb/s mode, if necessary. The gigabit Ethernet port is also used as a PoE power input, supports 48 V DC voltage and power supply on 2 or 4 pairs (detailed information can be found in the description).
Specifications
AF60-HD | |
Mechanical | |
---|---|
Dimensions |
Ø189 x 89 mm (Ø7.4 x 3.5") |
Weight |
Without mount: 1.8 kg (3.9 lb) |
Enclosure materials |
Aluminum alloy, UV stabilized plastic |
Mount material | Stainless steel (SUS304) |
Mount | 60G precision alignment pole mount (included) |
Wind loading | 64 N at 200 km/h (14.39 lbf at 125 mph) |
Weatherproofing | IPX6 |
Hardware | |
Processor |
Quad-Core ARM® Cortex® A72 at 1.6 GHz |
Memory | 2 GB DDR4 |
Networking interfaces |
(1) GbE RJ45 port |
Button | Factory reset |
RF connections | Internal |
Max. power consumption | 29.31W |
Power method |
Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-) or 2-Pairs (4, 5+; 7, 8-) |
Power supply |
48VDC, 0.65A gigabit PoE adapter (included) |
Supported voltage range | 48VDC ± 10% |
Operating temperature | -40 to 55° C (-40 to 131° F) |
Operating humidity | 5 to 95% noncondensing |
LEDs | |
Power |
Flashing white: bootup in progress |
Ethernet | Flashing blue: ethernet activity |
GPS | Blue: receiving at least (4) GPS satellite signals |
60G | Blue: active connection |
System | |
Maximum throughput |
3,8 Gb/s 6 Gb/s (with channel bonding enabled) |
Maximum range | 2 km |
Encryption | WPA2-PSK (AES) |
Uplink/Downlink ratio | 50 / 50 |
Software | |
OS | airFiber |
Modes | PtP only |
Services |
UISP Ping watchdo Web server SSH server NTP client System log Device discovery |
Utilities |
Beamform info Discovery utility Ping Trace route Speed test |
Network | Bridge mode |
Wireless settings | GPS sync |
Management interface |
Bluetooth management for easy setup over UISP app WEB UI |
Minimum software requirements |
Any modern WEB browser/iOS or Android based smartphone |
RF | |
Operating frequency |
57 to 66 GHz * Depends on regulatory region. |
GPS | Yes |
Channel bandwidth |
5160 MHz 4320 MHz w trybie channel bonding |
Operating channels |
58320 MHz 59400 MHz 60480 MHz 61560 MHz 52640 MHz 63720 MHz 64800 MHz *It depends on the channel bandwidth |
Beamwidth |
HPOL: NaN (the antenna is only vertically polarized) VPOL: 3° Elevation: 3° |
Electrical downtilt | 0° |