-
0,25 € netto
An integral part of Huawei's all-optical access solution, OptiXstar EG8010Hv6 is a bridging-type Optical Network Terminal (ONT) that uses Gigabit Passive Optical Network (GPON) technology to offer ultra-broadband access. With high forwarding performance guaranteeing the experience of data and High Definition (HD) video services — plus future-oriented service support capabilities — OptiXstar EG8010HV6 helps enterprise construct cutting-edge terminal solutions.
The EG8010Hv6 can be used as a client terminal (ONT) in the GPON network. It is equipped with a standard SC/APC class B+ optical connector. The range of power that the device can receive is -27 ~ -29 dBm. Supports standard wavelengths of 1490 nm / 1310 nm.
Bridge type ONT
The offered product can work as a bridge, it does not support routing. It is a basic terminal, you can allow your subscriber to choose any router, which is important for many customers. An additional advantage of the bridge type ONT is very low power consumption, which is a maximum of 2.5 W.
1 gigabit Ethernet port
Huawei EG8010Hv6 is equipped with 1 Gigabit Ethernet port with a bandwidth of 10/100/1000 Mbps. Supports port-based VLAN tags, 1:1 VLAN, N:1 VLAN, transparent VLAN and QinQ VLAN. Using this device, you can offer your subscribers Internet packages up to 1 Gb/s.
Specifications
EG8010Hv6 | |
Device Parameters | |
---|---|
Dimensions (H x W x D) (without pads) | 26 mm x 69 mm x 83 mm |
Weight | About 72 g |
Operating temperature | 0°C to 40°C |
Operating humidity | 5% RH to 95% RH (noncondensing) |
Power adapter input | 100–240 V AC, 50/60 Hz |
Optical Connector | SC/APC |
System power supply | 11–14 V DC, 1 A |
Static power consumption | 2.06 W |
Maximum power consumption | 2.5 W |
NNI | GPON |
UNI | 1GE |
Indicators | POWER/PON/LOS/LAN |
Memory | 128M flash, 256M RAM |
Interface Parameters | |
GPON port | Class B+ Receiver sensitivity: -27dBm ~ -29dBm Wavelengths: US 1310 nm, DS 1490 nm Wavelength blocking filter (WBF) Flexible mapping between GEM Port and TCONT GPON: consistent with the SN or password authentication defined in G.984.3 Bi-directional FEC SR-DBA and NSR-DBA Type B (single-homing & dual-homing) |
Ethernet port | Ethernet port-based VLAN tags and tag removal 1:1 VLAN, N:1 VLAN, or VLAN transparent transmission QinQ VLAN Limit on the number of learned MAC addresses MAC address learning Transparent transmission of IPv6 packets at Layer 2 |
Product Function | |
Smart O&M | Variable-length OMCI messages Active/Passive rogue ONT detection and isolation PPPoE/DHCP simulation testing |
Smart O&M | Indicator power saving Power consumption reduction of idle components in powersaving state PON power reduction |
QoS | Ethernet port rate limitation 802.1p priority SP/WRR/SP+WRR Broadcast packet rate limitation Flow mapping based on the VLAN ID, port ID, or/and 802.1p |
Security | MAC address filtering |
Common O&M | OMCI/Web UI Dual-system software backup and rollback 802.1ag Ethernet OAM Optical link measurement and diagnosis Loopback check |
Multicast | IGMP v2/v3 snooping MLD v1/v2 snooping Fast leave VLAN tag translation, transparent transmission, and removal for downstream multicast packets IGMP/MLD protocol packet rate limitation |