-
0,25 € netto
IP-COM Pro-S24 is a managed switch equipped with 24 Gigabit Ethernet ports (10/100/1000 Mb/s) and 4 SFP slots (1 Gb/s). It offers Layer 3 management, including DHCP server, inter-VLAN routing, multicasts (IGMP Snooping) and advanced QoS function. You can manage the switch using ProFi Controller - a centralized platform for managing multiple devices. Thanks to this, the Pro-S24 is perfect for networks consisting of ProFi access points, especially in locations where PoE is not necessary. The total switching capacity is 56 Gb/s, and the packet forwarding speed is 41.7 Mp/s. The offered product is distinguished primarily by advanced Layer 3 management, which will work in demanding locations.
24 gigabit Ethernet ports, 4 SFP slots
The switch is equipped with 24 gigabit Ethernet ports (10/100/1000 Mb/s) and 4 SFP slots (1 Gb/s). Thanks to this, it is a universal solution that will work among many Internet operators and companies.
The device is equipped with a built-in power supply, the maximum power consumption is 24 W. The housing has been adapted for mounting in a 19" Rack cabinet.
High performance, 12Mb buffer
IP-COM Pro-S24 has a packet buffer of 12 Mb, it is larger than in competing solutions. Thanks to this, the device ensures stable operation and enables full throughput.
The total switching capacity is 56 Gb/s, and the packet forwarding speed is 41.7 Mp/s. The switch has a table with a capacity of up to 16k MAC addresses.
Layer 3 management
The offered product supports advanced management, also in the Layer 3 layer. It enables the use of inter-VLAN routing, static IPv4 routing as well as dynamic and static ARP. It also fully supports Layer 2 configuration, including VLANs (access/trunk/hybrid), port aggregation, Spanning Tree protocols (STP/RSTP/MSTP) and multicasts (IGMP Snooping).
ProFi system
ProFi is a platform that allows centralized management of multiple devices from a single panel. You can easily add new devices to the network, update the software and change the configuration. You also have live access to network statistics. Not only access points, but also selected IP-COM switches are compatible with the ProFi system.
Specifications
IP-COM Pro-S24 | |
Hardware | |
---|---|
Network standards | IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.1p, IEEE802.1q, IEEE802.1w, IEEE802.1d, IEEE802.1s |
LED indicators | One Link/Act LED indicator for each port One Power LED indicator for each device One SYS LED indicator for each device |
Fixed ports | 24 x 10/100/1000 Base-T Ethernet ports 4 x 1000 Base-X SFP port 1 x RJ45 Console port |
Lightning protection | Port: 6 kV (Common mode) Power supply: 6 kV (Common mode) |
Forwarding mode | Store-and-forward |
Switching capacity | 56 Gb/s |
Packet forwarding rate | 41,7 Mp/s |
Switching buffer | 12 Mb |
MAC address table | 16k |
Input voltage |
100 - 240 V AC 50/60 Hz |
Whole switch consumption | < 24 W |
Dimensions | 440 x 179,6 x 44 mm |
Operating temperature | 0°C - 45°C |
Storage temperature | -40°C - 70°C |
Operating humidity | (10% - 90%)RH, non-condensing |
Storage humidity | (5% - 90%)RH, non-condensing |
Software | |
Security features | Support ARP receiving limit Support unknown mac address discard Support DoS attack defense Support 802.1x security authentication Support RADIUS authentication |
VLAN | IEEE 802.1Q VLAN VLAN Layer-3 interfaces Support three port modes: Access, Trunk and Hybrid |
DHCP | Support DHCP server Support DHCP relay Support DHCP snooping Support Option 82 policy configuration |
Routing | Support inter-VLAN routing Support IPv4 static routing Support dynamic ARP and static ARP Support ARP aging configuration |
Port aggregation | Support static aggregation Support LACP dynamic aggregation Support a maximum of 32 aggregation groups and a maximum of 8 member ports in each group |
STP (Spanning Tree Protocol) | Support IEEE 802.1d STP (Spanning Tree Protocol) Support IEEE 802.1w RSTP (Rapid Spanning Tree Protocol) Support IEEE 802.1s MSTP (Multiple Spanning Tree Protocol) Support edge ports Support BPDU statistics Support BPDU Guard, BPDU Filter, Support Root Guard, Loop Guard, and Loopback-detection |
Multicasty | IGMP Snooping V1/V2/V3 Support port fast leave |
Port mirroring | N:1 |
QoS | Support SP (Strict Priority) Support SWRR (Simple Weighted Round Robin) Support WRR (Weighted Round Robin) Support 802.1p port trust mode Support DSCP port trust mode Support a maximum of 8-queue service quality mapping Support Tail Drop Support storm suppression Support port speed limit |
ACL |
MAC ACL IPv4 ACL |
Loading and upgrade | Support FTP/TFTP/HTTP upgrade Support con guration import and export |
Management and maintenance | Support centralized control and management by ProFi software controller Support CLI configuration Support Telnet remote configuration Support SNMP V1/V2/V3 Support web management and maintenance Support system logs Support log classification Support NTP Support Ping & Tracert tests Support memory and CPU monitoring |