IP-COM F1126P-24-250W switch 24x FE, 1x GE, 1x Combo (SFP/GE), 24x PoE (802.3af/at)

IP-COM F1126P-24-250W switch 24x FE, 1x GE, 1x Combo (SFP/GE), 24x PoE (802.3af/at)

Brand: IP-COM

Product Code: IP-COM-F1126P-24250W

Catalog number: 9440

Warranty (months):

Special offer

Lowest price in the last 30 days: 128,04 € excl. tax

favoriteAdd to wishlist

Description

IP-COM F1126P-24-250W is a switch equipped with 24 fast Ethernet ports (10/100 Mb/s), 1 Gigabit Ethernet port (10/100/1000 Mb/s) and 1 Combo port - either Gigabit Ethernet or SFP . On all fast Ethernet ports there is a PoE power output in the IEEE 802.3af/at standard. The maximum power per port, depending on the standard, is 15.4 W for 802.3af or 30 W for 802.3at. The total power budget is 230 W, the device is equipped with a built-in power supply. The switch does not have any management, but offers 4 operating modes that you can switch between with a physical switch located on the housing. In standard mode, the device works as a normal switch; in Priority mode, ports G1 and G2/SFP2 are used as uplinks, and ports 1-8 have higher priority; in Extend mode, the bandwidth of ports 17 - 24 is limited to 10 Mb/s, and the range to 250 m; in VLAN mode, ports 1-24 are separated from each other and can only communicate with ports G1 and G2/SFP2.

The offered product is an ideal solution for extensive IP monitoring networks. It provides many ports and enough power to connect 24 cameras. At the same time, the Extend mode will allow you to supply power to places that are far away from the main point.

24 fast Ethernet (10/100 Mb/s) ports, 1 gigabitt Ethernet (10/100/1000 Mb/s) ports, 1 port Combo (GE / SFP)

The device is equipped with 24 Fast Ethernet ports (10/100 Mbps), 1 Gigabit Ethernet port (10/100/1000 Mbps), and 1 Combo port - for a choice between Gigabit Ethernet or SFP. It is ideal for powering IP cameras or VoIP phones in large networks. The SFP slot allows for connection to a switch even over long distances. The two Gigabit ports additionally enable cascading the device.

The switching capacity is 8.8 Gb/s, and the packet forwarding rate is 6.55 Mp/s.

24 PoE outputs, 230 W power budget

There is IEEE 802.3af/at standard PoE output on the 24 Ethernet ports. As per the standard, the maximum power per port is 15.4 W for 802.3af devices and 30 W for 802.3at devices. Such power supply is widely used in information technology devices, monitoring systems, and VoIP phones.

The maximum PoE power budget across all ports is 230 W, which is sufficient to power 24 IP cameras. The switch is equipped with a built-in 250 W AC power supply.

Four operating modes

The IP-COM F1126P-24-250W does not feature any management, but it is equipped with four operating modes. You can switch between modes using a physical switch located on the front of the enclosure.

Available modes:

"Standard" - the default mode where the device operates as a standard switch, and all ports can communicate with each other.
"Priority" - Ports G1 and G2/SFP2 function as uplinks, while ports 1 - 8 are set to high priority. All ports can communicate with each other.
"Extend" - the bandwidth of ports 17 - 24 is limited to 10 Mbps, but the transmission range increases to 250m. All ports can communicate with each other.
"VLAN" - Ports 1 - 24 can communicate exclusively with ports G1 and G2/SFP2.

The use of Fast Ethernet ports makes the offered product best suited for powering IP cameras or VoIP phones.

Specifications

F1126P-24-250W
Standards	IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.3af/at
LED indicators	24x Link / Act 1x G1 1x G2/SFP2 1x PoE-MAX 1x Power
Interfaces	24x fast Ethernet10/100 Mb/s 1x gigabit Ethernet 10/100/1000 Mb/s 1x Combo - Gigabit Ethernet or SFP
Lightning protection	Port: 6kV Power: 6kV
Forwarding mode	Store-and-forward
Switching capability	8,8 Gb/s
Packet forwarding rate	6,55 Mp/s
Buffer	4 Mb
MAC address table	16k
PoE supply	Ports 1-24 support standard IEEE802.3af/at 30W output per PoE port 230W output of the total PoE Power
Power consumption	250 W
Input voltage	100 - 240 V AC 50/60 Hz
Dimensions	440 x 178,8 x 44 mm
Four Modes	Standard: Default mode of the switch. In this mode, it works as an unmanaged switch; all ports can communicate with each other separately. Priority: In this mode, port G1 and G2/SFP2 serve as uplink ports, ports 1 – 8 serve as high priority port. All ports can communicate with each other separately. Extend: In this mode, data rate of ports 17 - 24 reduces to 10 Mbps, the maximum transmission distance can be 250 meters, and all ports can communicate with each other. VLAN: In this mode, ports 1 - 24 of the switch can communicate with port G1, G2/SFP2 separately, but cannot communicate with each other. You can enable this mode to reduce broadcast storm and isolate DHCP broadcast.
Operating temperature	0°C - 45℃
Storage temperature	-40°C - 70°C
Operating humidity	(10% - 90%)RH, non-condensing
Storage humidity	(5% - 90%)RH, non-condensing