-
0,25 € netto
The Ubiquiti UISP Fiber OLT XGS is an Optical Line Terminal equipped with 8 XGS-PON ports. Each port features symmetrical throughput of 10/10 Gb/s and supports a split ratio of 1:256. This allows you to connect a maximum of 2048 subscribers to the OLT. The uplink ports consist of 4 SFP28 slots with a throughput of 25 Gb/s each. Additionally, the device includes a gigabit Ethernet port for management and an RJ45 console port. The 1U-high enclosure is designed for use in a 19" Rack. It incorporates two redundant AC power supplies, ensuring continued operation if one fails. The maximum power consumption is only 70 W, significantly less than large, modular OLT terminals.
XGS-PON OLT terminal
The offered product is an Optical Line Terminal (OLT) designed for passive XGS-PON fiber networks. Each port supports symmetrical throughput of 10/10 Gb/s and allows for subscriber connections. The advantage of a passive network lies in the ability to split the signal using optical splitters, which are entirely passive and do not require power. This means that only the transmitting terminal (OLT) and the client terminals (ONT/ONU) need to be connected to power. Each port on the UISP Fiber OLT XGS supports a maximum split ratio of 1:256, allowing you to connect up to 256 subscribers per port.
8 PON ports, 4 SFP28 slots
The device is equipped with 8 PON ports, allowing you to connect a maximum of 256 subscribers to each port. This totals up to 2048 clients for the entire OLT terminal. For network uplink, 4 SFP28 slots with a throughput of up to 25 Gb/s are employed. The XGS-PON technology enables you to offer subscribers very high data rates, making it particularly well-suited for business clients who require substantial data packages.
Additionally, the OLT features a gigabit Ethernet port for management and an RJ45 console port. On the left side of the PON ports, there are LED indicators signaling the current operational status, providing visual cues for monitoring the device's performance.
Hot swap power supplies, low power consumption
The UISP Fiber OLT XGS is equipped with 2 hot-swappable AC power supplies. They operate redundantly, meaning that if one fails, the other takes over seamlessly. The input voltage range for these power supplies is 100 - 240 V AC. This design ensures continuous operation and provides a level of fault tolerance in case of a power supply failure.
One of the major advantages of the offered product is its low power consumption, which is a maximum of 70 W. This is significantly less than what is typically seen in large, modular systems from other manufacturers. The energy efficiency of the UISP Fiber OLT XGS contributes to lower operating costs and aligns with modern trends in environmentally conscious and energy-efficient networking solutions.
Rack 19"
The device is designed for rack mounting in a 19" Rack, with a height of 1U. The enclosure is constructed from SGCC steel, and the total weight is 5.29 kg. This form factor and construction make it suitable for integration into standard rack setups, providing convenience in deployment and maintenance within network infrastructure.
The product doesn't include PON transceivers! You have to buy it separetly.
Specifications
Ubiquiti UISP Fiber OLT XGS | |
Mechanical | |
---|---|
Dimensions | 442.4 x 285.6 x 43.7 mm (17.4 x 11.2 x 1.7") |
Weight | 5.29 kg (11.7 lb) |
Enclosure material | SGCC steel |
Hardware | |
Networking interface | (8) XGS/XG/GPON ports (4) 1/10/25G SFP28 ports* *The four SFP28 ports don't support mixed speed at 25 Gbps mode. Once one of the SFP28 ports is configured at 25 Gbps mode, the others will be limited at 25 Gbps too. The SFP28 ports only support mixed speed when all ports are at 1 Gbps or 10 Gbps. |
Management interface | Ethernet out-of-band Ethernet in-band RJ45 serial console port Bluetooth |
Memory | 512 MB DDR3 |
Onboard flash storage |
64 MB NOR 512 MB NAND |
Power method | (1) Universal AC input, 100-240V AC, 50/60 Hz |
Power supply | (2) Hotswap AC/DC PSU |
Supported voltage range | 100 - 240 V AC |
Max. power consumption | 70 W |
Button | (1) Factory reset |
Operating temperature | -10 to 45° C (14 to 113° F) |
Operating humidity | 10 to 95% non-condensing |
LEDs | |
System | Slow blinking white: system is booting Fast blinking white: reset to default Blinking white/blue: system is upgrading Slow blinking blue: system is connecting to UISP Fast blinking blue: locate system Steady white: system is ready Steady blue: system is ready and connected to UISP |
MGMT port | (1) White, steady on after link is up |
PON ports | (8) Steady white: PON link |
SFP28 ports | (4) White, steady on after link is up |