-
0,25 € netto
5 gigabit Ethernet ports, 1 PoE+ input+. 4 PoE+ outputs
The TP-Link SG1005P-PD is a switch equipped with 5 gigabit Ethernet ports (10/100/1000 Mbps). Ports 1-4 feature PoE+ output, supporting IEEE 802.3 af/at standards. The maximum power output per port, according to the standard, is 30 W. The total maximum power budget is 66 W.
Port 5 of the device has a PoE++ input. This input is compatible with IEEE 802.3 af/at/bt protocols.
Two additiona modes, passive cooling
The device features passive cooling, facilitated by its metal casing, ensuring efficient heat dissipation and eliminating the need for forced airflow.
Additionally, the switch offers two additional functions accessible via physical switches. In "Extend" mode, the throughput of ports 1-2 is limited to 10 Mbps, but the PoE range increases to 250 meters. "PoE Auto Recovery" mode automatically restarts connected devices upon loss of connection or detection of unresponsiveness.
Small desktop case
The casing stands out for its compact dimensions, measuring 158 x 101 x 25 mm. It is designed for desktop mounting, suitable for placement on a desk or shelf, and comes with rubber feet included in the package. Alternatively, you can mount the switch on a wall, but separate mounting screws are required.
Specifications
TP-Link SG1005P-PD | |
Hardware features | |
---|---|
Standards and Protocols | IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt, IEEE 802.3x, IEEE 802.1p |
Interface | 5× 10/100/1000Mbps RJ45 Ports 1× 10/100/1000 Mbps RJ45 PoE In Ports (compliance with 802.3af/at/bt Type3/bt Type4) 4× 10/100/1000 Mbps RJ45 PoE Out Ports (compliance with 802.3af/at) AUTO Negotiation AUTO MDI/MDIX |
Network Media | 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) |
Cooling | Passive |
Power Supply | Only Powered by PoE Device |
PoE Ports (RJ45) | PoE In Port: Port 5, Compliance with 802.3af/at/bt Type3/bt Type4 PoE Out Ports: Ports 1-4, compliance with 802.3af/at PoE Power Budget:
|
Dimensions | 158 × 101 × 25 mm (6,2 × 4,0 × 1,0 cali) |
Max Power Consumption | 2.68 W (90W PoE In, with no PD connected) 68.59 W (90W PoE In, with 66 W PD connected) |
Max Heat Dissipation | 9.112 BTU/h (90W PoE In, with no PD connected) 233.206 BTU/h (90W PoE In, with 66 W PD connected) |
Performance | |
Switching Capacity | 10 Gb/s |
Packet Forwarding Rate | 7,44 Mp/s |
MAC Address Table | 2k |
Software features | |
Advanced Features | Extend Mode Button (Ports 1–2, Up to 250 m PoE power supply and data transmission) PoE Auto Recovery (Ports 1-4) Mac Address Auto-Learning and Auto-Aging IEEE 802.3x Flow Control 802.1p/DSCP QoS IGMP Snooping |
Transfer Method | Store-and-forward |
Others | |
Package Contents |
SG1005P-PD Installation Guide |
Operating temperature | -30–70 ℃ (-22–158 ℉) |
Storage temperature | -40–70 ℃ (-40–158 ℉) |
Operating Humidity | 10–90% RH non-condensing |
Storage Humidity | 5–90% RH non-condensing |