-
0,26 € netto
EPON ONU terminal equipped with SC / PC port and one gigabit Ethernet port. The device can work in bridge and router mode, it also supports PPPOE and NAT. The EPON port is 1000BASE-PX20 compliant and can achieve 1.25 Gbps bandwidth for both sending and receiving data. The maximum transmission distance is 20 km. The use of the gigabit Ethernet port allows you to fully use the possibilities created by the fiber optic connection.
The offered product is intended primarily for use in homes and small offices. Thanks to the full support of the bridge mode, the subscriber can connect his own router if necessary. Due to the use of IEEE 802.3 QAM, the terminal can be remotely managed from the OLT level. This way you can also upgrade the software of the device.
EP101Z has bandwidth control, data encryption, and is also protected against broadcast storms. Additional advantages for the subscriber will be the small size of the device, as well as the low power consumption of a maximum of 2.3 W.
The device does not have the option of WAN configuration from the OLT level
Default login credentials:
older software - admin / admin
newer software - admin / stdONUi0i
The most important features:
- EPON SC / PC port, 1.25 Gb / s bandwidth (uplink and downlink);
- gigabit Ethernet port;
- fiber optic transmission range up to 20 km;
- router and bridge functionality;
- PPPOE and NAT;
- remote management from OLT (also via SNMP and Telnet);
- remote software upgrade.
Specification
EP101Z | |
Interfaces | |
---|---|
PON |
EPON SC / PC port Standard 1000BASE-PX20 Symmetrical 1.25 Gb / s data sending / receiving Single-mode fiber Split ratio: 1:64 Transmission distance: up to 20 km |
Ethernet |
Gigabit 10/100 / 1000M port Automatic negotiation Full / half duplex mode RJ45 connector Automatic MDI / MDIX patching Distance: 100 m |
Power |
12 V DC External 12 V, 0.5 A power supply included |
Efficiency | |
Optical transmission (PON) | |
Wavelength |
Tx 1310 nm Rx 1490 nm |
Tx optical power | -1 - 4 dBm |
Sensitivity Rx | -27 dBm |
Optical power saturation | -3 dBm |
Type of connector | SC/UPC |
Optical fiber |
9/125 Singlemode |
Data transmission | |
Capacity |
Downstream: 950 Mb/s Upstream: 930 Mb/s |
Loss of packets | < 1*10E-12 |
Delay | < 1,5 ms |
Management | |
Management method |
From OLT level - IEEE 802.3 QAM Remote management via SNMP and Telnet Local management |
Management functions |
Status monitoring Configuration Alarm Logs |
Others | |
Additional Features |
Layer 2 switching VLAN TAG / UNTAG VLAN conversion Speed limiting (per port) Priority classification Broadcast storm protection Link detection |
LEDs indicators |
POWER PON LOS LAN |
Physical parameters | |
Housing | Plastic, desktop type |
Power |
External 12 V, 0.5 A AC / DC power adapter (included) Maximum power consumption: 2.3 W |
Dimensions | 110x70x30 mm |
Weight | 0,1 kg |
Environmental features |
Permissible operating temperature: 0 to 50 °C Storage temperature: -40 to 85 °C Permissible air humidity during operation: 10% -90% non-condensing Permissible air humidity during storage: 5% -95% non-condensing |