Polski
English
Italiano
Español
Čeština
Српски
Deutsch
Ελληνικά
Slovenský
-
0,27 $ netto
UPLINK EPON OLT 2220 2x PON 2x GbE 2x SFP/SFP+
Archived product
EP2220 is an EPON OLT terminal equipped with 2 Gigabit Ethernet ports, 2 slots for SFP modules (for uplink), 2 PON slots (downlink) and management ports. The device is enclosed in a 1U Rack 19 " casing and is able to handle a maximum of 128 client terminals at a split of 1:64. The maximum data transmission range is 20 km and the port capacity of EPON is 1.25 Gbps.
The product offers a lot of management functions. It allows the monitoring and the configuration of ports, as well as the authentication of the connected client terminals. Each of the client terminals can be remotely managed and configured.
The advantage of the offered product is itssmall size and low price, as well as a low power consumption - only 25 W. It is well-suited for FTTx solutions, especially FTTH. A useful feature are various types of uplink ports.
The most important features:
- 2 Gigabit Ethernet ports (uplink);
- 2 slots for SFP modules(uplink);
- 2 slots for SFP modules- PON ports (downlink);
- 2 management ports - fast Ethernet and console;
- capacity of the EPON port - 1.25 Gb / s;
- up to 128 connected users at a split of 1:64;
- transmission range - 20 km;
- the ability to remotely manage and configure client terminals.
Specification:
| EP2220 | |
| Uplink ports 1 Gb/s | |
|---|---|
| Ethernet |
2x 10/100/1000 Automatic negotiation |
| SFP | 2 SFPslots |
| EPON Ports | |
| Quantity | 2 |
| Interface | SFP |
| Connector type | 1000BASE-PX20+ |
| Maximum split | 1:64 |
| Management ports | |
| Ethernet | 1x 10/100BASE-T (port out-band) |
| Console | 1 port |
| Features of the PON port | |
| Transmission range | 20 km |
| Capacity | 1,25 Gb/s (symetric) |
| Wavelength |
Tx 1490 nm Rx 1310 nm |
| Connector | SC/PC |
| Fiber type | 9/125µm SMF |
| Tx Power | +2 - +7 dBm |
| Rx acuteness | -27 dBm |
| optical power(saturation) | -6 dBm |
| Software features | |
| Management modes | SNMP, Telnet and CLI |
| FManagement function |
Fan Group Detecting Port status monitoring and configuration management Configuration of the Layer2 switch Trun, RSTP, IGMP, QoS EPON management: DBA, ONU authentication, ACL, QoS Remote configuration and management of client terminals User management Alarm management |
| Switch Layer2 |
VLAN protocol Up to 4096 VLANs VLAN tag / Un-tag VLAN transparent transmission QinQ IEEE 802.3d trunk support RSTP QoS based on port, VID, TOS and MAC address IGMP Snooping IEEE 802.x flow control Statistics and port monitoring |
| Layer 3 Route |
1024 Host Routes 512 Subnet Routes 256 IP Multicast Groups |
| EPON functions |
Bandwidth control Support for the IEEE 802.3ah standard Range up to 20 km Data, multimeter, VLAN, RSTP encryption Dynamic Bandwidth Allocation (DBA) Automatic updating of client terminal software, auto-discovery, link detection It supports VLAN division and user separation to protect against broadcast storm LLID Power-off alarm Isolation between ports ACL and SNMP Dynamic distance calculation - EMS online IGMP Proxy |
| Physical / environmental features | |
| Housing | Rack 19", 1U |
| Dimensions | 442x200x43,6 mm |
| Weight | 3,1 kg |
| Power |
90 - 264 V AC 47 / 63 Hz |
| Maximum power consumption | 25 W |
| Permissible operating temperature | From -10 to 55 degrees Celsius |
| Permissible storage temperature |
From -40 to 85 degrees Celsius |
| Permissible air humidity | 5%-90% non-condensing |
Customers who bought this product also purchased
Other products in the same category that you may find interesting: