-
1,08 zł netto
8 GPON SFP Hisense LTE3680P modules are included!
Uplink GP8862 is an OLT terminal adapted for use in the GPON network. It is equipped with 8 PON ports, 8 uplink Gigabit Ethernet ports, 6 SFP (uplink) slots and 2 SFP + slots (also uplink). Fully supports multicast and IGMP Snooping, perfect for triple play service delivery.
The maximum split per port is 1: 128, so theoretically, when the GP8862 is fully populated, 1024 customers can be connected. The throughput per port is 2.5 Gb / s downstream and 1.25 Gb / s upstream. Approximately the device has the functionality of a managed switch, in addition to supporting DHCP (server / relay / snooping) and static routing and ARP proxy.
The GP8862 casing is adapted for installation in a 19 "Rack. An additional advantage of the device is the possibility of management via the web graphic interface.
The terminal has been tested by us to work with ONU / ONT terminals from other manufacturers! We have successfully combined the GP8862 with Tenda G103, Uplink FX660 and Huaweiem HG8245H. The device should also work with other Huaweia terminals.
Instructions for adding client devices (with examples): Configuration GP8862
Web configuration manual
Configuration examples
The most important features:
- OLT terminal for GPON network;
- web graphic interface;
- 8 PON ports;
- max split to PON port: 1: 128;
- bandwidth per PON port: downstream: 2.5 Gb / s, upstream: 1.25 Gb / s;
- 8 gigabit Ethernet ports (uplink);
- 6 SFP (uplink) slots;
- 2 SFP + slots (uplink);
- full multicast and IGMP Snooping support;
- DHCP server / relay / snooping, static routing.
Specification:
Uplink GP8862 | |
Uplink ports |
8 Gigabit Ethernet Ports 10/100/1000 Mb / s 6 SFP slots 2 SFP + slots |
PON ports |
8 ports type B + / C + Max. split: 1: 128 |
Management port |
1x out-band port 1x console port |
Maximum transmission range | 20 km |
PON port capacity |
Downstream: 2488 Mb/s Upstream: 1244 Mb/s |
Wavelength |
Tx: 1490 nm Rx: 1310 nm |
Transmitting power | 1 ~ 5 dBm |
Reception sensitivity (Rx) | -28 dBm |
Optical power saturation | -8 dBm |
Management method | SNMP, Telnet, CLI, Web |
Management functions |
Port monitoring and configuration Layer2 management such as VLAN, Trunk, RSTP, IGMP, QoS etc. PON management functions: DBA, ONU authorization, ACL, QoS ONU configuration and management Alarm management |
Layer2 switch |
16K MAC addresses VLAN Up to 4096 VLANs VLAN targ / untag, VLAN transparent transmission QinQ Storm control based on port Port isolation Bandwidth limit per port 802.1D and 802.1W Static LACP QoS based on port, VIC, TOS and MAC address Access Control List (ACL) IEEE 802.x flow control Port statistics and monitoring |
Multicasty |
IGMP Snooping 256 IP Multicast groups |
DHCP |
DHCP Server DHCP Relay DHCP Snooping |
Layer 3 routing |
ARP Proxy Statyczny routing Subnet routes: 512 Host routes: 1024 |
GPON functions |
Tcont cares Gemport traffic ITU-T 984x. ONU auto-discovery / link detection / remote firmware update VLAN division User separation Broadcast storm resistance Port isolation ACL / SNMP RSTP, IGMP Proxy |
Power method | Built-in AC / DC power supply |
Maximum power consumption | 25 W |
Dimensions | 442x320x43,6 mm |
Weight | 3,1 kg |
Operating temperature | -10 to 55 °C |
Storage temperature | -40 to 85 °C |
Operating humidity | 5%-90% non-condensing |