RED Power RP18V1A-P-WM-EU PoE power supply 18V 1A FE EU

RED Power RP18V1A-P-WM-EU PoE power supply 18V 1A FE EU

Brand: RED Power

Product Code: RP18V1A-P-WM-EU

Catalog number: 9043

Warranty (months):

Special offer

Lowest price in the last 30 days: 5,55 € excl. tax

favoriteAdd to wishlist

Description

RED Power RP18V1A-P-WM-EU is a PoE power supply with an output voltage of 18 V DC and a current of 1 A. The output power is approximately 18 W at nominal current. It is equipped with 2 fast Ethernet ports (10/100 Mb/s), one of them is data input (LAN) and the other is the output for power and data (POE). The power supply is a "wall mount" type, it is plugged directly into the electrical outlet, without an additional power cable. It has a LED indicating the operating status.

Passive PoE

The power supply uses the Power over Ethernet technology - it transmits power via the Ethernet cable. Supports passive PoE, power is transferred on 2 pairs, using 4, 5+ / 7, 8- wires.

Voltage 18 V DC, current 1 A

At the output, the power supply provides a voltage of 18 V DC and a maximum current of 1 A. At nominal voltage, the output power is about 18 W. The power supply can work with numerous devices available on the market, especially with MikroTika solutions.

Fast Ethernet ports (10/100 Mb/s)

The power supply uses fast Ethernet ports (10/100 Mb/s). Thanks to this, it was possible to maintain an attractive price without reducing the functionality. Many networking solutions use a fast Ethernet port and do not need a power supply with higher throughput.

LED indicator, direct connection to the socket

The power supply has a built-in LED which informs about the operating status. The device plugs directly into a wall mount socket, without an additional power cable. This is much more convenient than desktop products that use an additional cable.

Efficiency Level VI, numerous security features

The power supply meets the restrictive standards of the new Efficiency Level VI standard, the power consumption of the power supply is less than 0.2 W, and the efficiency is at least 88% at nominal voltage. Overcurrent and short-circuit protection are included. After the cause of the short-circuit or too high voltage has ceased to exist, the power supply should resume operation by itself.

Many uses

The 18 V voltage is perfect for powering MikroTika devices. The power supply will also be suitable for other applications, with products having a wide input voltage range.

Specifications

Input
RP18V1A-P-WM-EU
Nominal voltage	100 -240 V AC
Nominal frequency	50 / 60 Hz
Voltage range	90 - 264 V AC
Frequency range	47 - 63 Hz
Current	Max 0.5 A (at nominal load)
Inrush current	Max 30 A at 110 V AC / 60 Hz Max 60 A at 230 V AC / 50 Hz
No-load power	Max 0.2 W
Output
Nominal voltage	18 V DC
Nominal current	1 A
Ripple and noise	240 mV p-p
Rise time	Min 40 ms at full load and 115 V AC
Line regulation	± 5%
Load regulation	± 5%
Efficiency	88%
Protections and standards
Short circuit	The power supply will be auto recovered when short circuit faults remove
Over current	The power supply will be auto recovered when over current faults remove
Overheating	When the high temperature fault is eliminated, the power supply will be restored automatically
EMI standards	EN55022:2010 EN55015:2013
Environmental and others
Operating temperature	-20° ~ 45° C
Storage temperature	-20° ~ 60° C
Relative humidity	5%-90% RH
Dimensions	80 x 70 x 70 mm (with plug) 80 x 30 x 31 mm (without plug)

1+	:	1,62 €
20+	:	1,48 €
50+	:	1,37 €