-
1,08 zł netto
The TP-Link SG1006PP is a switch equipped with 6 gigabit Ethernet ports (10/100/1000 Mbps). One port features PoE++ power output (supporting protocols 802.3 af/at/bt), while ports 2-4 are equipped with PoE+ power output (802.3 af/at). The power output per port depends on the utilized standard, with 60 W for 802.3 bt, 30 W for 802.3 at, and 15.4 W for 802.3 af. The total power budget is 64 W. The switch does not have any management capabilities but supports two additional operating modes, which can be controlled using physical switches. In "Extend" mode, the throughput of the first two PoE ports is limited to 10 Mbps, but the PoE transmission range increases up to 250 meters. "PoE Auto Recovery" mode automatically restarts devices connected to PoE upon loss of connection or unresponsiveness. The SG1006PP features a small, desktop-type metal casing. It employs passive cooling, making it nearly silent during operation.
6 gigabit Ethernet ports, 1 PoE++ output, 3 PoE+ outputs
The switch is equipped with 6 gigabit Ethernet ports. Port 1 features PoE++ power output - 802.3 af/at/bt. Ports 2-4 have PoE+ power output - 802.3 af/at. The power output per port depends on the protocol used and is maximally 60 W for 802.3 bt, 30 W for 802.3 at, and 15.4 W for 802.3 af.
The total power budget for the entire switch is 64 W. This is sufficient for connecting several devices, depending on their power requirements. With the PoE++ port, you can power modern, high-power-consuming access points efficiently.
"Extend" mode
The "Extend" mode (which you can switch using physical switches located at the back of the enclosure) is designed to extend the power range on ports 1-2. The throughput of these ports is limited to 10 Mbps, but the PoE range increases up to 250 meters. This is an excellent solution if you need to connect a remote IP camera without incurring additional costs.
"PoE Auto Recovery" mode
In "PoE Auto Recovery" mode (which you can switch using physical switches located at the back of the enclosure), devices connected to ports 1-4 will be automatically restarted upon loss of connection or unresponsiveness. This means that if an IP camera (or any other device) becomes unresponsive, it will be automatically restarted. This helps reduce your downtime by eliminating the need for manual intervention to troubleshoot and restart devices.
Plug & play
The SG1006PP is a plug-and-play device, meaning it works immediately after being connected without the need for initial configuration. Simply plug it into a power source, and it will start operating.
Intelligent Power Management
The PoE ports have assigned priority of operation, starting from the first port to the last. If the total power budget is exceeded, the switch will cut off the port with the lowest priority. This ensures that the remaining ports continue to operate, and the devices connected to them are powered.
Metal Casing
The offered product features passive cooling. Its metal casing facilitates proper heat dissipation. The device is characterized by its compact size, and the primary mounting method is desktop placement, suitable for putting on a desk or shelf. Optionally, you can mount the SG1006PP on a wall; however, mounting screws must be purchased separately as they are not included in the package.
Specifications
TP-Link SG1006PP | |
Hardware features | |
---|---|
Interface | 6× 10/100/1000Mbps RJ45 Ports AUTO Negotiation AUTO MDI/MDIX |
Network Media | 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) |
Cooling | Passive |
External Power Supply | External Power Adapter (Output: 53.5 VDC / 1.31 A) |
Packet Forwarding Rate | 8,928 Mp/s |
PoE Ports (RJ45) | Port 1 compliances with 802.3af/at/bt; Ports 2-4 compliance with 802.3af/at Power Supply: 64 W |
Mac Address Table | 4K |
Switching Capacity | 12 Gb/s |
Dimensions ( W x D x H ) | 158x101x25 mm (6,2x4,0x1,0 cali) |
Max Power Consumption | 4.75 W (220/50 Hz. no PD connected) 71.46 W (220/50 Hz. with 64 W PD connected) |
Max Heat Dissipation | 16.20 BTU/h (220/50 Hz. no PD connected) 243.68 BTU/h (220/50 Hz. with 64 W PD connected) |
Software features | |
Advanced Features | Compatible With IEEE 802.3af/at/bt Compliant PDs Mac Address Auto-Learning And Auto-Aging IEEE 802.3x Flow Control 802.1p/DSCP QoS IGMP Snooping Extend Mode Button (Ports 1–2, Up to 250 m PoE power supply and data transmission) PoE Auto Recovery (Ports 1-4) |
Transfer Method | Store-And-Forward |
Others | |
Package Contents |
SG1006PP Power AdapterInstallation Guide |
Operating Temperature | 0–40 ℃ (32–104 ℉); |
Storage Temperature | -40–70 ℃ (-40–158 ℉) |
Operating Humidity | 10–90% RH non-condensing |
Storage Humidity | 5–90% RH non-condensing |