-
1,10 zł netto
TP-Link EAP113-Outdoor is an outdoor access point designed for exterior use. It is compatible with the Omada system, allowing centralized management through a unified platform. The device is capable of transmitting wireless networks in the 2.4 GHz band, compliant with the Wi-Fi 4 standard. It supports IEEE 802.11 b/g/n protocols, with a maximum theoretical connection throughput of 300 Mb/s. EAP113-Outdoor features 2 external omnidirectional antennas with a 3 dBi gain. The antennas are detachable, allowing for replacement with stronger ones if needed. The device is well-suited for Omada networks in locations requiring outdoor wireless network coverage. It is powered via PoE - passive 48 V or IEEE 802.3af compliant.
Wi-Fi 4 N300 (2,4 GHz) network
The device can transmit wireless networks in the 2.4 GHz band, compliant with the Wi-Fi 4 standard. It supports IEEE 802.11 b/g/n protocols, with a maximum theoretical throughput of 300 Mb/s. EAP113-Outdoor utilizes 2x2 MIMO, with two external omnidirectional antennas responsible for transmission.
External omnidirectional antennas
The offered product features 2 external omnidirectional antennas with a 3 dBi gain. They are waterproof and suitable for outdoor use. If necessary, you can unscrew the antennas and replace them with others according to your requirements.
Small dimensions
The EAP113-Outdoor enclosure stands out for its compact dimensions, with a length (excluding antennas) of approximately 215 mm. This is an important advantage if you plan to use the device indoors - despite the visible antennas, it will not stand out as much as other larger access points.
1fast Ethernet port, PoE
The EAP113-Outdoor is equipped with 1 fast Ethernet port (10/100 Mbps), which also serves as the Power over Ethernet (PoE) input. The device supports PoE in the IEEE 802.3af standard or passive PoE with a voltage of 48V. The maximum power consumption is only 4.11W.
Wall / pole mounting
With the accessories included in the package, you can mount the access point on a wall or pole.
Long range
The use of external omnidirectional antennas and high transmitting power make the EAP113-Outdoor stand out in terms of coverage compared to the competition. It is perfect for areas where the wireless network needs to cover a large area. According to the manufacturer, the outdoor range can reach up to 200 square meters.
IP65 ingress protection
The enclosure features an IP65 protection rating, making it fully suitable for outdoor use. The interior is protected against water and dust ingress. Additionally, the device is safeguarded against surges, which can occur in many locations.
Omada platform
TP-Link EAP113-Outdoor is compatible with the Omada system. This platform enables centralized management of multiple devices, including access points, switches, and routers. It facilitates the maintenance of large networks and significantly saves administrator time. You can manage the system using either a hardware controller or a software controller available on PC.
Management via the Omada App
You can also use the Omada mobile application available for Android / iOS devices for configuration. In a few simple steps, it will guide you through the initial setup and facilitate the first network startup. Then, it will provide you access to the current status of the network, management of the configured installation, and network monitoring.
Specifications
TP-Link EAP113-Outdoor | |
Hardware | |
---|---|
Interface | 1× Fast Ethernet (RJ-45) Port (Support 48V Passive PoE/802.3af PoE) |
Button | Reset |
Power Supply | 48V Passive PoE (+4,5pins; -7,8pins); 802.3af PoE |
Power Consumption | 4,11 W |
Dimensions ( W x D x H ) | 214.9 × 46 × 37.7 mm (8.5 × 1.8 × 1.5 in) |
Antenna Type | 2× 3 dBi External Omni waterproof |
Weatherproof Enclosure | IP65 |
Mounting | Pole / Wall Mounting (Kits included) |
Wireless | |
Concurrent Clients | 100 |
Wireless Standards | IEEE 802.11 b/g/n |
Frequency | 2,4 GHz |
Signal Rate | 11n: Up to 300 Mbps (dynamic) 11g: Up to 54 Mbps (dynamic) 11b: Up to 11 Mbps (dynamic) |
Transmit Power | < 20 dBm |
Wireless Functions | Multiple SSIDs(Up to 8 SSIDs) Enable/Disable Wireless Radio Automatic Channel Assignment Transmit Power Control (Adjust Transmit Power on dBm) QoS(WMM) Load Balance Rate Limit Reboot Schedule Wireless Schedule Wireless Statistics based on SSID/AP/Client |
Wireless Security | Captive Portal Authentication Access Control Wireless Mac Address Filtering Wireless Isolation Between Clients SSID to VLAN Mapping Rogue AP Detection 802.1X Support 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK |
Management | |
Omada App | Yes |
Centralized Management | Omada Hardware Controller (OC300) Omada Hardware Controller (OC200) Omada Software Controller |
Cloud Access | Yes. Requiring the use of OC300, OC200, or Omada Software Controller. |
Email Alerts | Yes |
LED ON/OFF Control | Yes |
Management MAC Access Control | Yes |
SNMP | v1, v2c |
System Logging Local/Remote Syslog | Local/Remote Syslog |
SSH | Yes |
Web-based Management | HTTP / HTTPS |
L3 Management | Yes |
Multi-site Management | Yes |
Management VLAN | Yes |
Others | |
Package Contents | 300Mbps Wireless N Outdoor Access Point, EAP113-Outdoor Mounting Kits Waterproof Rubber Insert Waterproof Antennas Installation Guide |
Operating Temperature | -30–65 ℃ (-22–149 ℉) |
Storage Temperature | -40–70 ℃ (-40–158 ℉) |
Operating Humidity | 10–90% RH non-condensing |
Storage Humidity | 5–90% RH non-condensing |