-
0,27 $ netto
Opton S-QOTKSdD is a universal drop-fiber cable for outdoor use. The outer shell (thickness about 0.7 mm) is made of polyurethane, it is resistant to UV radiation and the negative effects of weather conditions. The offered product is equipped with 12 G.657.A2 type fibers covered with multicolored varnish (without tubes). The 657.A2 fiber is distinguished by better flexibility than the 652.D, becouse of this it can also be successfully used inside the buildings in places where the cable needs to be run, for example along the wall.The optical fiber is distinguished by a small outside diameter - 3.4 mm and weight - about 10.4 kg / km.
The cable has been reinforced with a large amount of aramid fibers (9 den), the maximum tensile force (instantaneous / installation) is 800 N. S-QOTK is completely dielectric, it can be successfully used in overhead installations and telecommunication ducts. It is perfect as a main route in places where the use of a thicker fiber is impossible or unprofitable. The cable is supplied on a plastic roll that allows a convenient unwinding.
The maximum span: in the Polish conditions marked as NESC Heavy (due to icing and low temperatures), the maximum span is 22 meters! Correspondingly for lighter climatic conditions, the span is: NESC Medium: 42 meters, NESC Light: 79 meters.
The cable is sold on a roll of 1000 meters (1 km)!
Proposed cable slings:
FISH 2011 handle
FISH-U handle
DROP handle
The most important features:
- 12 fibers G.657.A2;
- small diameter - about 3.4 mm;
- external coating resistant to UV radiation and negative weather conditions (made of PU);
- reinforcement with a large ammount of aramid fibers
- overhead or telecommunication duct installation ;
- installation (instantaneous) tension force - 800 N;
- maximum span (under NESC Heavy conditions): about 22 meters.
Specification:
S-QOTKSdD 12J | |
Fiber optic |
12 G.657.A2 fibers Singlemode 9/125 um |
Fibers coverage |
Varnish, colors: White Green Gray Blue Yellow Brown Black Red Orange Purple Pink Light blue (no tubes) |
Aramid fibers | 9 den |
Outer shell material | PU (FR) |
External coating thicknes | 0,7 mm (± 0,1) |
cable diameter | 3,4 mm (± 0,1) |
Outer shell colour | black |
Weight | 10,4 kg/km |
Maximum tension force (installation / instantaneous) |
800 N |
Bending radius (during work) | 10x cable diameter |
Bending radius (during the instalation) | 15x cable diameter |
Permissible operating temperature | From -20 to 70 degrees Celsius |
Permissible installation temperature | From -10 to 60 degrees Celsius |
G.657A2 fiber properties | |
---|---|
Attenuation |
1310nm: ≤ 0,36 dB/km 1383nm: ≤ 0,35 dB/km 1550nm: ≤ 0,27 dB/km 1625nm: ≤ 0,30 dB/km |
PMD coefficient | ≤ 0,1 dB (ps/√km) |
Wave cutoff lenght | 1260 nm |
Zero chromatic dispersion | 1300 - 1324 nm |
chromatic dispersion edge | ≤ 0,09 ps / (nm^2 * km) |
Chromatic dispersion |
1285 - 1330 nm: ≤ 3.0 ps / (nm^2 * km) 1550 nm: ≤ 18 ps / (nm^2 * km) |
Module field diameter | 8,6 μm ± 0,4 |
Core decentricity | ≤ 0,3 μm |
Cout diameter (cladding) | 125 μm |
Non-circularity of the core | ≤ 0,5% |
The refractive index |
1.4690 by 1310 nm 1.4695 by1550 nm |
Macrosign suppression |
1 coil, diameter 20 mm: 0.75 dB / km at 1550 nm 1.5 dB / km at 1625 nm 10 coils, diameter 30 mm: 0.25 dB / km at 1550 nm 1 dB / km at 1625 nm |