Polski
English
Italiano
Español
Čeština
Српски
Deutsch
Ελληνικά
Slovenský
-
0,25 € netto
YOFC Z-XOTKtmd-24 micro duct fiber optic cable 24J 2T12F, G.652.D
Price
1 - 5999: 0,31 €6000 - : 0,27 €
*prices without tax
favoriteAdd to wishlist
Oversized transport
The cable is originally wound on a roll of 6 km - there is the possibility of rewinding (a smaller section of the cable on another roll), the cost of the rewinding (the drum is included): 25 €
YOFC Z-XOTKtmd is an optical fiber cable designed for installation in microducts. It is equipped with 24 G.652.D (single-mode) fibers placed in 2 tubes. The tubes and fillers are twisted around a central strengthening element - an FRP rod, additionally, the whole structure has a circumferential reinforcement in the form of aramid fibers. The outer coating, 0.5 mm thick, is made of HDPE. The outer diameter of the cable is 5.4 mm, and it weighs 26 kg/km.
The offered product is designed for use in microducts. The outer coating is corrugated, allowing for cable blowing installation method. It is best to use Z-XOTKtmd with microducts of internal diameter 8 - 12 mm.
Cable construction
The cable is characterized by a multi-tube construction, with tubes and fillers twisted around a central strengthening element - an FRP rod. This design ensures that the cable is rigid, and the fibers do not move or shift under the influence of temperature.
The entire structure is further reinforced circumferentially with Kevlar (aramid) fibers to enhance tensile strength. Additionally, a ripcord is placed in the coating to facilitate its stripping.
Microduct
The offered product has a corrugated coating and is designed for installation in microducts using the blowing method. You can use it in microducts with an internal diameter of 8 - 12 mm.
Such a method of installation significantly speeds up the work process. Depending on the type, microducts can be used directly in the ground or in telecommunication ducts.
24 fibers (1 tubes, 4 fillers)
Z-XOTKtmd has 24 G.652.D single-mode fibers placed in 2 tubes (12 fibers per tube). In addition, there are 4 fillers inside the coating. The outer diameter of the cable is 5.4 mm, and it weighs 26 kg/km.
The coating is made of durable HDPE, with a thickness of 0.5 mm. The cable is designed for outdoor installation, and its CPR class is Fca.
G.652.D (Singlemode) fiber
The fiber is equipped with G.652.D Single-mode fibers. This fiber is characterized by low attenuation, which is ≤ 0.35 dB/km for the 1310 nm wave and ≤ 0.21 dB/km for the 1550 nm wave. Such low losses have been achieved at the expense of less flexibility compared to G.657.A2/G.657.B3 type fibers.
Due to the above parameters, cables equipped with G.652.D fibers are best suited for main routes. In such applications, reduced flexibility is not a disadvantage, whereas for long-distance transmissions, the total attenuation will be significantly lower compared to other types of fibers.
Specifications
| YOFC Z-XOTKtmd 24 | |
| Fiber quantity | 24 |
| Fiber type | G.652.D |
| Maximum attenuation value of cable @1310 nm | ≤ 0,35 dB/km |
| Maximum attenuation value of cable @1550 nm | ≤ 0,21 dB/km |
| Element quantity (tubes + fillers) | 6 |
| Fiber quantity per tube | 12 |
| Tube dimension | 1,45 mm |
| Material of central strength element | FRP |
| Water blocking material | Water blocking yarn |
| Peripheral strength member | Aramid yarns |
| Outer sheath material | HDPE |
| Outer sheath color | Black |
| Outer sheath thickness | 0,5 mm |
| Ripcord quantity | 1 |
| Outer diameter | 5,4 mm |
| Cable weight | 26 kg / km |
| Microduct inner diameter | 8 - 12 mm |
| Minimum cable bending radius |
Static: 10 x diameter Dynamic: 20 x diameter |
| Transportation and storage temperature | -30° ~ 70° C |
| Installation temperature | -10° ~ 50° C |
| Operation temperature | -30° ~ 70° C |
| Fiber / tube colours |
1: red 2: green 3: blue 4: yellow 5: white 6: gray 7: brown 8: purple 9: aqua 10: black 11: orange 12: pink |
| Mechanical | |
|---|---|
| Tension |
Standard: IEC 60794-1-21-E1 Load: 600 N Duration time: 1 min
|
| Crush |
Standard: IEC 60794-1-21-E3A Load: 500 N Duration time: 1 min
|
| Repeat Bending |
Standard: IEC 60794-1-21-E6 Radius: 20 x diameter, 25 cycles Load 25 N
|
| Torsion |
Standard: IEC 60794-1-21-E7 Length under test: 1 m 10 cycles, turns: 180° Load: 40 N
|
| Water Penetration |
Standard: IEC 60794-1-22-F5 Water height: 1 m, duration time 24 h
|
| Temperature Cycling |
Standard: IEC 60794-1-22-F1 Temperature: -30° ~ 70° C Duration time: 12 h Cycles: 2
|
Customers who bought this product also purchased
Other products in the same category that you may find interesting: