Polski
English
Italiano
Español
Čeština
Српски
Deutsch
Ελληνικά
Slovenský
-
1,10 zł netto
Huawei MA5800-X2 OLT terminal with GPHF GPON board (16x SFP C+), 2x MPSA control board, DC power board
Price
10 999,00 zł
13 528,77 zł incl. tax
favoriteAdd to wishlist
The offered product is a set consisting of a complete OLT MA5800-X2 terminal and a 16-port board H901GPHF. The set also includes PON transceivers!
The MA5800 is the industry's first smart aggregation OLT with a distributed architecture. It is positioned as the next-generation OLT for NG-PON. The product is designed to help carriers build networks with larger bandwidths, higher speeds, and smarter connectivity to deliver better service experience.
Providing GPON, 10G PON(including XG-PON and XGS-PON), P2P 10GE/GE access, the MA5800 supports deployment on FTTH, FTTD, FTTB, and FTTC networks. This makes it applicable to home access, enterprise access, mobile backhaul, and Wi-Fi hotspot backhaul scenarios to aggregate all services on one fiber network.
The MA5800 functions as a large-capacity aggregation device on the network to aggregate the traffic from ONTs, MDUs, and campus switches, thereby simplifying the network architecture and reducing the OPEX.
MA5800-X2(small-capacity):
MA5800-X2 supports 2 serviceslots withbackplane H901BPSB.
The product includes:
- 1 GPON board GPHF;
- 16 C+ transceivers;
- 2 control boards MPSA (2x GE, 2x GE/10GE);
- 1 power board PISA (DC input);
- fan board.
First launch:
Specification:
| MA5800-X2 | |
| Physical Specifications | |
|---|---|
| Supported cabinet | N63E-22 |
| Maximum weight (including mounting brackets) | 9.4kg |
| Maximum input current |
DC power supply: 20 A AC power supply: 8 A |
| Power supply mode |
DC power support (dual for backup) AC power supply + batteryfor backup |
| Working voltage range |
DC power supply: -38.4 V to -72 V AC power supply: 100 V to 240 V |
| Rated voltage |
DC power supply: -48 V/-60 V AC power supply: 110 V/220 V |
| Ambient temperature |
-40°C to +65°C* The MA5800 can start up at a lowest temperature of −25°C .
*The +65°C temperature refers to the highest temperature measured at the air intake vent. |
| Ambient humidity | 5% RH to 95% RH |
|
Maximum Number of Ports in a Subrack (full configuration) |
|
| GPON ports | 32 |
| XG-PON ports | 32 |
| XGS-PON ports | 32 |
| 10GE/GE ports | 16 |
| GE/FE ports | 96 |
| System specifications | |
| Switching capacity of thecontrol board (load sharing mode) |
MPSC: 480Gbit/s MPSA: 248Gbit/s |
| Maximum bandwidth per service slot (load sharing mode) |
MPSC: 80Gbit/s MPSA: 40Gbit/s |
| Maximum number of concurrent 4K video users | 2000 |
| Maximum number of MAC address | 262143 |
| Maximum number of IPv4 routing tables | 65536 |
| Maximum number of IPv6 routing tables | 16384 |
| Maximum number of ARP tables |
V100R017C10 version: 98816 V100R018C00 and V100R018C10 versions: 131072 V100R019C00 and later versions:32768 |
| Switching/Forwarding delay | Short forwarding delay: The 100 Mbit/s Ethernet port sends the 64-byte Ethernet packets at a delay shorter than 20 μs. |
| Bit error rate (BER) in full load | A BER smaller than 10 e-7 for a port that transmits data in full load |
| Primary Features | |
| Layer 2 features |
VLAN+MAC forwarding SVLAN+CVLAN forwarding PPPoE+ DHCP option82 |
| Layer 3 features |
Static route RIP/RIPng OSPF/OSPFv3 IS-IS BGP/BGP4+ ARP DHCP relay VRF |
| MPLS&PWE3 |
MPLS LDP MPLS RSVP-TE MPLS OAM MPLS BGP IP VPN Tunnel protection switching TDM/ETH PWE3 PW protection switching |
| QoS |
Traffic classification Priority processing trTCM-based traffic policing WRED Traffic shaping HQoS PQ/WRR/PQ+WRR ACL |
| Multicast |
IGMP v2/v3 IGMP proxy/snooping MLD v1/v2 (V100R016C10 and later versions) MLD Proxy/Snooping (V100R016C10 and later versions) VLAN-based IPTV multicast IPv4 PIM and PIM-SSM(V100R017C00 and later versions) |
| IPv6 |
IPv4/IPv6 dual stack IPv6 L2 and L3 forwarding DHCPv6 relay |
| System reliability |
GPON type B/type C protection 10G GPON type B protection BFD(V100R016C10 and later versions) ERPS (G.8032) MSTP Monitor Link(V100R018C10 and later versions) Intra-board and inter-board LAG In-service software upgrade (ISSU) of the control board 2 control boards and 2 power boards for redundancy protection In-service board fault detection and rectification Service overload control |
| Eco-friendly and energy-saving | In compliance with the Code of Conduct v5 released by the European Commission |
| VXLAN (V100R018C00 and later versions) | Virtual eXtensibleLAN |
| SRv6 (V100R019C10 and later versions) | Segment Routing IPv6 |
| EMC standards |
IEC 61000-3-2 IEC 61000-3-3 IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-4 IEC 61000-4-5 IEC 61000-4-6 IEC 61000-4-11 IEC 61000-4-29 EN 61000-3-2 EN 61000-3-3 EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-29 ETSI ES 201 468 ETSI EN 300 386 ETSI EN 300 132-2 ETSI EN 300 253 VCCI V-3 EN 55024 EN 55032 ITU-T K.20 CISPR 24 CISPR 32 ITU-T K.11 ITU-T K.20 ITU-T K.44 |
| Environment protection standards |
2011/65/EU (RoHS) EN 50581:201 2EC NO. 1907/2006 (REACH) 2012/19/EU (WEEE) |
| Environment standards |
ETS 300 019 1-1 ETS 300 019 1-2 ETS 300 019 1-3 ETS 300 019 2-1 ETS 300 019 2-2 IEC 60068-2 IEC 60721-2-6 IEC 60721-3-1 IEC 60721-3-2 IEC 60721-3-3 ETSI EN 300 753 |
| Security standards |
EN 60950-1 EN 60825-1 EN 60825-2 IEC 60825-1 IEC 60825-2 IEC 60950-1 |
| Reliability standards |
MIL-HDBK-217F BELLCORE TR-332/SR-332 |
| PON interface standards |
ITU-T G.984.1 ITU-T G.984.2 ITU-T G.984.3 ITU-T G.984.4 ITU-T G.987.1 ITU-T G.987.2 ITU-T G.987.3 ITU-T G.988 ITU-T G.9807.1 |
| H901PISA (power board) | |
| Port | 3V3 DC |
| Input voltage |
-48 V or -60 V DC (input voltage range: -38.4 V to -72 V) |
| Power Consumption | Static: 2.5 W Maximum: 2.5 W |
| Weight | 0.72 kg |
| H901PISA (power board) | |
| Port | 3V3 DC |
| Input voltage |
-48 V or -60 V DC (input voltage range: -38.4 V to -72 V) |
| Power Consumption | Static: 2.5 W Maximum: 2.5 W |
| Weight | 0.72 kg |
| H901GPHF | |
| Ports | 16 |
| Modules |
SFP OLT - B+ or C+ class (in the set there are C+ modules) |
| Fiber optic connector | SC/UPC |
| Wavelength |
Tx: 1490 nm Rx: 1310 nm |
| Bandwidth |
Tx: 2,49 Gb/s Rx: 1,24 Gb/s |
| Minimum optic power Tx |
B+ class: 1,5 dBm C+ class: 3 dBm |
| Maximum optic power Tx |
B+ class: 5 dBm C+ class+: 7 dBm |
| Maximum reception sensitivity Rx |
B+ class: -28 dBm C+ class: -32 dBm |
| Fiber optic cable | Singlemode |
| Network range | 20 km |
| Optic power overload |
B+ Class: -8 dBm C+ Class: -12 dBm |
| Extinction | 8,2 dB |
| Maximun size of frame |
2004 b 9216 with Jumbo Frames switched on |
| Power consumption |
Static: 25 W Maximum: 50 W |
| Permissible operating temperature | From -40 to 65' C |
| Dimentions | 23,3 x 257,9 x 399,2 mm |
Customers who bought this product also purchased
Other products in the same category that you may find interesting: